DBH 9475Vit radial shaft seal — 23 x 36 x 6

DBH 9475Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9475Vit and any equivalents.

When a rotating shaft needs its lubricant held in place and outside contamination kept away, the DBH 9475Vit lip seal is one of the sizes we supply. It fits a 23 mm shaft, a 36 mm housing bore and a 6 mm height, so it works well in assemblies where there is not much room along the shaft. DBH is one of the brands available through MR.

The code 9475Vit belongs to the DBH radial shaft seal line. Reading the size off the seal is straightforward: shaft 23.00 mm, housing bore 36.00 mm, height 6.00 mm. The Lz-R-H designation describes how the seal is built — a sealing lip, a spring that keeps the lip loaded and a reinforced body. Equipment that turns on a shaft and needs its oil or grease contained can use this seal as a like-for-like replacement when those three measurements match.

Typical homes for a seal this size include gearboxes, pumps, electric motors, transmission shafts and other process equipment. The job is always the same: hold the lubricant where it belongs and stop dust, water and particles from reaching bearings and gears. On a 23 mm shaft, this model seals effectively even when axial space is tight — as long as the shaft surface has been ground and carries no burrs.

Before ordering, compare the three dimensions against the original part: shaft, housing bore and height. The lip runs on a surface that should be hard enough and finely finished, and it pays to lubricate the lip before pressing the seal in and to use a proper driver so the lip is not nicked. The Lz-R-H configuration is made for running conditions where oil is present and temperatures stay moderate.

If you are after a different size or something close to the 9475Vit, send the complete part number or the measurements taken from the old seal. MR supplies alternatives in various brands and configurations, and the more you tell us — diameters, height, lip style, the application itself — the closer the match will be. We can also help when the shaft shows wear or the housing tolerance is unusual.

To get a quote moving, message the part number 9475Vit or the 23 x 36 x 6 mm dimensions to MR by WhatsApp or email. You will get back the options and technical details needed to confirm the match. If the shaft condition or the installation raises questions, ask before you order — the wrong seal choice tends to show up as a leak.