DBH 9475Pol radial shaft seal — 23 x 36 x 6

DBH 9475Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9475Pol and any equivalents.

A lip seal in the DBH 9475Pol range keeps lubricant where it belongs and keeps dust, water and particles out. It fits a 23.00 mm shaft, a 36.00 mm housing bore and a 6.00 mm height, and it carries the Lz-R-H design. Gearboxes, pumps, electric motors and transmission equipment running continuously in contact with oil or grease are the usual homes for this seal.

The code 9475Pol points to a single-lip radial shaft seal. Read the size as shaft 23.00 mm, housing 36.00 mm, height 6.00 mm. The Lz-R-H designation describes a sealing lip combined with a reinforced body, a layout meant for rotating shafts under permanent lubrication. The lip elastomer travels on a ground track, while the outer body is pressed into the bore so the seal stays put and does not leak.

Seals of this family hold oil or grease in and hold contamination out at the same time. That is why they turn up in gearboxes, centrifugal pumps, electric motors, conveyor rollers, mixers and machine tools. Agricultural and industrial drives with transmission shafts rely on them too, since a working seal shields the bearings and keeps the assembly running. The compact envelope suits low and medium power equipment.

Selection starts with three measurements: shaft diameter, housing bore and the height available. The shaft surface should be ground, free of splines and burrs, with hardness and roughness that will not chew the lip. The bore needs to be clean, burr-free and at the right diameter for a press fit. On installation, coat the lip with the oil or grease used in the application, keep the lip facing the fluid side and avoid hammer blows.

Need a matching size? Send the code 9475Pol, or the 23 x 36 x 6 mm dimensions together with the Lz-R-H design. With that we can search the radial shaft seal category for alternatives and check that shaft, bore and height line up. Where there is room, design or material options can also be reviewed against the fluid and the working temperature. Details about the equipment make the search more accurate.

For a quote on the DBH 9475Pol oil seal, message the code to MR Industrial Accessories on WhatsApp. We answer with the options that fit your equipment. A photo of the old seal or caliper readings also help confirm the reference before you order.