DBH 9432 radial shaft seal — 46 x 72 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9432 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9432 and any equivalents.
For maintenance teams working on gearboxes, pumps or electric motors, the DBH 9432 radial shaft seal is a direct replacement option. It keeps oil or grease inside the assembly and blocks dust and water from entering along the rotating shaft. The seal measures 46.00 mm at the shaft, 72.00 mm at the housing and 8.00 mm in height, and it uses the Lx design with a sealing lip and spring.
The part number 9432 identifies this radial shaft seal from the DBH brand. Its three key dimensions are shaft 46.00 mm, housing 72.00 mm and height 8.00 mm. The Lx configuration means the seal has a lip with a spring that presses against the shaft to retain lubricant. The outer case presses into the housing bore, holding the seal centered and firm while the lip runs on the rotating shaft.
You will find this seal in gearboxes, centrifugal pumps, electric motors, rollers, and chain or belt drives. It also appears in machine tools and continuous process lines where losing lubricant can stop production. Because it is a wear part, check it during every preventive maintenance interval.
During installation, make sure the shaft is clean and free of burrs or lathe marks, and that its surface has the right hardness and roughness. Lubricate the lip before sliding it into place. Use a tube or press that pushes on the outer edge only, never on the lip. The housing must be straight and free of impacts. If the old seal failed, look for the root cause: excessive bearing play, a scored shaft or high internal pressure will damage the new seal as well.
If you need an alternative, we can search within the same seal category. Send the complete part number, the shaft, housing and height dimensions, and a photo of the old seal if available. Our team reviews the brands we supply and confirms which option fits without modifying the housing. We can also advise on a double-lip version or one with a metal case.
MR Industrial Accessories LLC supplies the DBH brand as part of its seals and oil seals line. For a quote on the 9432 oil seal, send the part number by WhatsApp or email. We also assist with selecting the correct seal for your shaft type and operating conditions.
Dimensions
- Shaft (d)
- 46mm
- Housing bore (D)
- 72mm
- Height (h)
- 8.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9432 oil seal?
- The DBH 9432 oil seal has a shaft diameter of 46.00 mm, a housing diameter of 72.00 mm and a height of 8.00 mm. It is a radial shaft seal with an Lx design, meaning it has a sealing lip and spring. These are the dimensions from the manufacturer's data sheet.
- How do I know if the 9432 oil seal will replace the one I have installed?
- Check the three dimensions: shaft diameter, housing diameter and height. If they match those of your old oil seal, the 9432 is compatible. If any dimension is different, contact us to find an equivalent within the same seal category.
- What care should I take when installing a radial shaft seal?
- Clean the shaft and housing thoroughly, lubricate the lip before installation, and use a tube or press that applies force to the outer edge. Do not strike the lip or slide it on dry. Verify that the shaft has no burrs or excessive wear.