DBH 9412 radial shaft seal — 62 x 95 x 10

DBH 9412 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9412 and any equivalents.

The DBH 9412 is a radial shaft seal sized 62 mm at the shaft, 95 mm at the housing and 10 mm in height. Its Lx design means a sealing lip with a spring, made for rotating shafts. This seal keeps lubricant in and contaminants out, protecting bearings and bushings. Because it wears over time, replace it once you see oil loss or dirt getting past it. MR Industrial Accessories supplies this brand and can help you confirm the right seal for your equipment.

The code 9412 points to a specific size in the DBH line. When you read a radial seal designation, the three numbers that matter most are shaft diameter, housing diameter and height: here that is shaft 62 mm, housing 95 mm, width 10 mm. The Lx design tells you the seal has a spring-loaded lip, which is the common choice for rotating shafts. The seal sits press-fit in the housing while its lip rides on the shaft, forming a barrier against oil or grease escape and against outside dust.

You will find this type of seal in gearboxes, pumps, electric motors, transmission shafts and continuous-process equipment. In each case it shields the bearings or bushings nearby, stopping lubricant from leaking out and particles from working their way in. It shows up often in industrial machinery, pumping equipment and transmission systems where the shaft turns at moderate speed and the service temperature stays fairly steady.

Fitting a radial shaft seal starts with clean surfaces: check the shaft and housing for burrs or marks. Before you push it in, coat the lip with the same oil or grease the equipment uses. Keep the seal square to the shaft as it goes in and avoid hitting the lip directly. A chamfer on the housing makes insertion easier. Your choice of seal depends on speed, temperature and the fluid being retained, so confirm those details against the manufacturer's product page for each application.

If you need this seal or a cross-reference from another brand, send part number 9412 or the shaft, housing and height dimensions. A photo of the part or the housing also works. We look at alternatives within the same series and help you make sure the replacement fits.

To order the DBH 9412, message us on WhatsApp with the part number and quantity. If mounting or compatibility questions come up, ask and we will walk you through it. We support factories and plants with technical advice.