DBH 9355 radial shaft seal — 35 x 48 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9355 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9355 and any equivalents.
The DBH 9355 is a radial shaft seal designed to keep lubricant in and contaminants out of rotating shaft assemblies. Its code indicates a 35 mm shaft, a 48 mm housing bore and an 8 mm width, with an Lx lip configuration. You will find it in gearboxes, pumps, motors and other power transmission units where a shaft turns inside a fixed housing.
This seal comes from the DBH line and carries the reference 9355. The size breakdown is straightforward: shaft 35.00 mm, housing 48.00 mm, width 8.00 mm. The Lx design uses a single lip with a spring, a common choice for lubricated rotating shafts. The flexible lip contacts the shaft while the outer metal case sits in the housing with an interference fit, blocking oil or grease loss and keeping dust and water out.
Seals of this size appear in gear reducers, centrifugal pumps, electric motors, compressors and belt or chain drives. They also show up in machine tools, food processing equipment and conveyors. In every case, the seal helps protect bearings and gears from early wear by holding lubricant in place and stopping contaminants from getting in.
Proper installation matters. Check that the shaft matches the specified diameter and has no scratches or heavy wear, since a rough shaft will shorten lip life. The housing bore should be clean, free of burrs and at the correct size. Before fitting, coat the lip with the same oil or grease used in the machine. Use an installation sleeve or tube that pushes on the metal case, not on the lip, and never hit the seal directly with a hammer.
If you need this seal or a cross-reference, send us code 9355 or the shaft, housing and width dimensions. We can suggest alternatives from the DBH range or other brands we supply. Sharing details like lubricant type, shaft speed and operating temperature helps us narrow down the best match.
To request a quote for the DBH 9355, message us on WhatsApp and mention code 9355. If you do not have the part number, provide your shaft and housing dimensions instead. We will reply with the technical information you need to select the right seal.
Dimensions
- Shaft (d)
- 35mm
- Housing bore (D)
- 48mm
- Height (h)
- 8.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 9355 seal?
- The DBH 9355 seal has a 35.00 mm shaft diameter, a 48.00 mm housing diameter and an 8.00 mm height. These match the standard designation and allow interchange with equivalent seals from other brands that share the same size combination.
- What type of shafts is this seal used on?
- It is used on rotating shafts that need to retain lubricant and exclude contaminants, such as those in gearboxes, pumps, motors and transmission equipment. The Lx design with a single lip and spring suits applications with continuous lubrication and moderate speeds.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp with code 9355 or your shaft and housing dimensions. We will send you the quote and, if needed, look for a compatible alternative within the brands we carry.