DBH 9264Pol radial shaft seal — 21.8 x 35 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9264Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9264Pol and any equivalents.
When a shaft turns inside a housing and lubricant has to stay in while dirt stays out, the DBH 9264Pol radial shaft seal is the part that does that job. It measures 21.80 mm at the shaft, 35.00 mm at the housing bore and 7.00 mm in height, and its Lx-R-H construction covers rotating duty. MR supplies this brand and helps you match the seal to the equipment.
Reading the 9264Pol code tells you what you are holding: a DBH radial shaft seal built to the Lx-R-H layout. In that designation, the Lx-R-H profile describes a sealing lip, a reinforced body and a shape intended for rotation. The three figures to check before ordering are shaft 21.80 mm, housing 35.00 mm and width 7.00 mm. The elastomer lip rides against the rotating shaft, forming a dynamic barrier that holds oil or grease in place and keeps outside matter away.
You will find seals of this type in gearboxes, centrifugal pumps, electric motors, compressors, spindles and belt or chain drives. Food, chemical and metallurgical plants use them, and so do maintenance shops that rebuild rotating equipment. Anywhere a shaft passes through a housing and lubricant must not escape, a radial shaft seal is the usual answer.
Installation decides how long the seal lasts. Wipe the shaft and the housing bore, and remove burrs or scratches that could cut the lip. Coat the lip with the same oil or grease the equipment runs on. Press the seal in squarely, loading the outer diameter evenly and keeping pressure off the lip. A chamfer at the housing entry helps it seat without damage. When equipment comes apart, fit a new seal, because the lip stiffens with age.
For a quote on the 9264Pol or a comparable seal, send the code, or the sizes 21.80 x 35.00 x 7.00 mm, by WhatsApp or email. If the space allows a different height or diameter, the team can point you to another option. MR also sources other brands, so tell us the application and the lip material you need and we will help you choose.
Dimensions
- Shaft (d)
- 21.8mm
- Housing bore (D)
- 35mm
- Height (h)
- 7.00mm
- Design
- Lx-R-H
Frequently asked questions
- What size shaft and bore does the DBH 9264Pol fit?
- It suits a 21.80 mm shaft and a 35.00 mm housing bore, with a 7.00 mm height. Confirm these three figures against your housing before ordering.
- Where is this seal typically used?
- On rotating shafts in pumps, motors, gearboxes and similar machinery, where it keeps lubricant in and contaminants out under normal oil or grease service.
- How do I get a quote for the 9264Pol?
- Send the code 9264Pol, or the dimensions 21.80 x 35.00 x 7.00 mm, to MR by WhatsApp or email. We reply promptly and can suggest equivalents or help with the lip material.