DBH 9262Pol radial shaft seal — 85 x 145 x 12/37

DBH 9262Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9262Pol and any equivalents.

The DBH 9262Pol is a radial shaft seal of the single-lip type. It press-fits into a housing bore and rides on a rotating shaft, holding lubricant inside the assembly and keeping dust, water and particles out. Equipment such as gearboxes, pumps, electric motors and transmission drives relies on this kind of seal wherever a shaft passes through a lubricated wall. Its design A 167 pairs a sealing lip with a metal outer case.

Reading the size callout is the first step: shaft 85 mm, housing 145 mm, overall height 12.00/37.00 mm. The A 167 designation identifies a radial shaft seal built with a sealing lip and a metal case that seats in the housing bore. The two height figures reflect the difference between the 12 mm body section and the lip or dust guard reaching 37 mm, which varies with how the manufacturer configures the part.

You will find this seal pattern on gearboxes, speed reducers, centrifugal pumps, electric motors, transmission shafts and process lines that run continuously. In every case the shaft turns through a lubricated wall: the lip holds oil or grease in, while the outer flange sheds dust and splashes. Because it is a wear part, it gets replaced once leakage becomes visible or the lip hardens and stops flexing.

Matching the seal to the application starts with confirming both diameters against the data sheet. The shaft should be ground and free of burrs, and the housing bore clean with no distortion. Grease or oil the lip with the same lubricant used in the equipment, then drive the seal in with a support tube to avoid cutting the lip. A shaft with play or a rough finish will leak no matter how accurate the dimensions are.

When you request a quote, include the complete code along with the shaft, housing and height measurements. That lets us check the DBH line and look at compatible options. If design A 167 turns out not to suit your equipment, we can also point you toward a different lip or case style.

Send code 9262Pol through WhatsApp to MR Industrial Accessories and we will quote the seal with the dimensions confirmed. If mounting is unclear or you want to weigh another option, share a photo of the old part or the housing and we will go through it with you.