DBH 9242 radial shaft seal — 72 x 95.4 x 8

DBH 9242 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9242 and any equivalents.

Part number 9242 from DBH is a radial shaft seal that keeps lubricant where it belongs and blocks contaminants from reaching the bearing cavity. It fits a 72 mm shaft, a 95.40 mm housing bore and an 8.00 mm height, and its A 146 design sets the lip profile and outer body geometry. Press it into a machined bore and it runs against the rotating shaft. MR Industrial Accessories LLC supplies this brand and helps you match the right seal to the job.

Reading the designation helps when you compare options. The 9242 is the item number, while the three values that matter for fit are the shaft diameter (72 mm), the housing bore (95.40 mm) and the height (8.00 mm). The A 146 designation describes how the lip and outer body are built, which affects how the seal sits in the bore and contacts the shaft. Get those four details right and the seal will do its job: hold oil or grease in and keep dust, water and particles out.

Seals like the DBH 9242 turn up in gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission assemblies. In each case the goal is the same, protecting bearings and gears from outside contamination while keeping the lubricant contained. You will find them in industrial machinery, agricultural equipment and pumping systems where the shaft turns continuously or on an intermittent cycle.

Before ordering, confirm that your shaft and housing match the dimensions above. The bore should be clean, free of burrs and cut to the right diameter and depth. During installation, coat the lip with the same oil or grease the equipment uses, seat the seal squarely and avoid hitting or tilting it. The lip must face the lubricant side. If the shaft shows wear or a groove, a repair sleeve or a call to our team is the next step.

Looking for a cross to the DBH 9242? Send the part number, the shaft, housing and height measurements, and a photo of the old seal. We will point you to equivalents in the brands we carry or tell you if a special build is needed. We can also help you settle on lip type, material and configuration based on temperature, speed and the lubricant in use.

For a quote on the DBH 9242 or any other size, message the part number to MR Industrial Accessories LLC on WhatsApp or by email. Our team answers promptly and can suggest equivalents or help you choose.