DBH 9241Vit radial shaft seal — 58 x 74 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9241Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9241Vit and any equivalents.
The DBH 9241Vit is a radial shaft seal built to hold lubricant in and keep contaminants out where a shaft turns inside a housing. It fits a 58 mm shaft, a 74 mm bore and an 8.00 mm width, which places it in gearboxes, pumps and other power transmission assemblies. MR Industrial Accessories LLC supplies this brand and helps you confirm the correct seal for the job.
The code breaks down simply: the 9241Vit designation identifies the seal within the DBH line, while the A 145 design refers to a metal-outer-case lip seal meant to be press fitted into a cylindrical housing bore. Shaft 58 mm, housing 74 mm, width 8.00 mm. Read that way, the number tells you where the part belongs before you open the box.
You will find this seal in gearboxes, electric motors, centrifugal pumps, mixers and conveyor rollers. Its role is the same everywhere: it keeps oil or grease where it belongs and blocks dust and water from reaching the bearings. Agricultural and general industrial equipment running at moderate shaft speeds and within standard elastomer temperature limits are common homes for it.
Installation rewards a little care. Inspect the shaft for burrs or a worn track, make sure the bore is clean and round, then coat the lip with the same lubricant used in the assembly. Press the seal in squarely until it bottoms out. If the shaft shows a groove from the old lip, a wear sleeve or a different size may be the better route.
Need an equivalent? Send the 9241Vit number or the three dimensions you measured. Our team checks options across the brands we supply, keeping tolerances and design type in mind, and can tell you whether the mounting space allows a variant with an extra lip or a double lip.
Quotes are handled by part number through WhatsApp or email, and we answer promptly. MR Industrial Accessories LLC supplies bearings, mounted units, power transmission components and sealing products to customers in the United States and several Latin American countries, and we are glad to help you match the right part to your equipment.
Dimensions
- Shaft (d)
- 58mm
- Housing bore (D)
- 74mm
- Height (h)
- 8.00mm
- Design
- A 145
Frequently asked questions
- What size is the DBH 9241Vit seal?
- It is a 58 x 74 x 8 mm seal: 58 mm shaft, 74 mm housing bore, 8.00 mm width. Those three figures are enough to identify the replacement without ambiguity.
- How do I check that this seal fits my equipment?
- Measure the shaft and the bore of the housing where the old seal sat, and confirm the available depth. If you read 58 mm and 74 mm with 8.00 mm of space, the 9241Vit is the matching replacement. If anything is unclear, send us the equipment brand and model.
- Can I get a seal in a different size?
- Yes. Send your shaft, housing and width measurements by WhatsApp or email, and a photo of the old seal if you have one. We look for an equivalent within the lines we supply and confirm the option that fits.