DBH 9069 radial shaft seal — 12 x 35 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 9069 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 9069 and any equivalents.
The DBH 9069 is a radial shaft seal that sits in a housing bore and works against a rotating shaft. It keeps lubricant where it belongs and blocks dust, water and particles from reaching the bearing area. The Lx design is a single lip with a spring, sized for shafts running with lubrication. Its three dimensions are 12.00 mm for the shaft, 35.00 mm for the housing and 7.00 mm for the height, which makes it a common replacement where axial room is tight.
The part number 9069 identifies this seal within the DBH line. Read the size as shaft 12.00 mm, housing 35.00 mm, height 7.00 mm. In the Lx design, a flexible lip with a spring contacts the shaft while the outer body holds in the bore, giving both the static and the dynamic seal. Selection is made by dimensions and service conditions, not by power or load.
Typical locations include gearboxes, pumps, electric motors, rollers, machine tools, mixers, conveyors and other transmission equipment where a shaft turns inside a housing. In food, chemical and process plants, the lip compound is matched to the fluid and the working temperature. Because the lip is a wear item, it is worth inspecting during every preventive maintenance stop and changing it once leaks or lubricant loss show up.
Installation starts with a clean shaft, free of burrs and marks, and a bore without dents. Lubricate the lip, then press the seal in with a tube or shim that pushes on the outer edge only, never on the lip. If the shaft surface is worn, a seal with the lip set in a different position can be an option. Shaft speed, temperature, lubricant type and contamination level all feed into the final choice of material and design.
For a quote on part number 9069 or on the 12 x 35 x 7 mm size, send the part number and the application details through WhatsApp or email. It also helps to include the equipment, the brand of the original seal and a photo of the housing. With that, our team can suggest equivalents from the DBH line or from other brands we supply, as long as shaft, housing and height stay the same. Where space allows, a different height or a double lip can also be reviewed.
Dimensions
- Shaft (d)
- 12mm
- Housing bore (D)
- 35mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What size is the DBH 9069 oil seal?
- Shaft 12.00 mm, housing 35.00 mm, height 7.00 mm. It is a radial shaft seal in Lx design. If your equipment takes a different size, send us the data and we will look for an equivalent.
- How do I confirm this seal fits my machine?
- Check the shaft diameter, the housing diameter and the height, then look at the lip type and material. When the three dimensions line up and the service is similar, it is a direct replacement. If you are unsure, send us the original part number.
- What should I watch for during installation?
- Keep the shaft and bore clean, lubricate the lip and press the seal with a tube that contacts the outer edge. Do not strike or force the lip, and make sure the shaft has no burrs or wear at the contact area.