DBH 8950 radial shaft seal — 70 x 85 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8950 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8950 and any equivalents.
When a rotating shaft passes through a housing and the lubricant has to stay on one side while dirt and moisture stay on the other, a radial shaft seal does the job. The DBH 8950 is a single-lip seal in the Lx design, built for cylindrical housings and standard metric fits. MR Industrial Accessories supplies this brand and can help you confirm the size before you order.
The designation 8950 covers a seal with a shaft diameter of 70 mm, a housing bore of 85 mm and an overall height of 8.00 mm. The Lx code describes how the lip and the outer body are arranged, which is what determines how the seal grips the shaft and seats in the bore. This is a component for rotary motion only, so it is not intended for reciprocating shafts or for high-pressure service.
Typical installations include gearboxes, centrifugal pumps, electric motors, conveyor rollers and other power transmission equipment. The same seal also shows up in agricultural machinery, industrial washing machines and lubrication circuits, wherever oil or grease must be held in and outside contamination kept out. Any time a shaft turns inside a housing and two environments need to be separated, this is the sealing solution.
Selection starts with the two diameters and the height. The shaft surface should be ground and hard enough that it does not wear the lip ahead of time, and the housing bore should be cylindrical with the finish the seal manufacturer calls for. During installation, lubricate the lip and use a tool that will not cut or distort it; avoid hitting the seal with impact tools.
To get a quote, send the complete part number along with the shaft, housing and height measurements, and a photo of the old seal if you have one. With those details we can check for alternatives in the lines we carry. The reference does not have to match exactly; what counts is that the dimensions and the lip style work in your equipment.
Send the DBH 8950 part number by WhatsApp or email and our team will get back to you with the options that suit your machine. If you are unsure about selection or mounting, we can walk you through it so the repair is done right the first time.
Dimensions
- Shaft (d)
- 70mm
- Housing bore (D)
- 85mm
- Height (h)
- 8.00mm
- Design
- Lx
Frequently asked questions
- What size is the DBH 8950 oil seal?
- It is a radial shaft seal with a 70 mm shaft diameter, an 85 mm housing bore and a height of 8.00 mm. Confirm these values against your shaft and housing before ordering.
- How do I ask for an equivalent to the 8950 seal?
- Send the 8950 reference plus the shaft, housing and height dimensions by WhatsApp or email. A photo of the old seal helps as well, and with that information we look for a compatible option among the brands we supply.
- What does the Lx design mean on this seal?
- Lx refers to the internal DBH designation for the lip and outer body configuration, which defines how the seal contacts the shaft and fits into the housing. Contact us if you need the technical details confirmed.