DBH 8948 radial shaft seal — 65 x 85 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8948 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8948 and any equivalents.
The DBH 8948 is a radial shaft seal sized for a 65 mm shaft, an 85 mm housing bore, and a 10 mm width. Its role is to keep lubricant where it belongs and to block dust, water, and particles from reaching bearings and bushings. It presses into the housing and runs against a ground, lubricated shaft surface. You will find this seal in pumps, electric motors, and gearboxes as a common replacement item.
The part number DBH 8948 carries the size in its designation: shaft 65 mm, housing 85 mm, width 10 mm. The Lx design is a single-lip seal with a spring, built for setups where the seal needs to follow small misalignments while staying in contact with the shaft. DBH is one of the brands MR supplies, and the original part number is kept so identification stays clear during replacement.
This oil seal suits gearboxes, centrifugal pumps, electric motors, compressors, and power transmission equipment. In each case it divides a lubricated side from a side exposed to dust or moisture. Machine tools and agricultural equipment also use it where the shaft turns at moderate speed and sealing protects the lubricant and the bearings.
Before fitting the seal, confirm the shaft measures 65 mm and has the right surface finish; burrs or wear can harm the lip. Coat the lip with the same oil used in the equipment, then press the seal in squarely with an installation tube that bears on the outer diameter. If the housing bore shows damage, consider a seal with a reinforced case. Selection should account for rotation speed and operating temperature.
For an equivalent, send part number 8948 on WhatsApp together with a photo of the old seal or caliper readings. You can also provide shaft and housing diameters and the available width. With that information, MR Industrial Accessories checks alternatives within the same series or from other brands we supply, keeping tolerances and lip type in mind.
To request a quote for the DBH 8948 oil seal, message the part number to MR Industrial Accessories on WhatsApp. We will respond with replacement options and can help you choose the correct seal for your application.
Dimensions
- Shaft (d)
- 65mm
- Housing bore (D)
- 85mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8948 oil seal?
- The DBH 8948 oil seal has a 65 mm shaft diameter, an 85 mm housing diameter, and a 10 mm height. These dimensions match the designation and are marked on the product. If you need to verify, measure the shaft and housing with a caliper before ordering.
- How do I know if this oil seal is compatible with my equipment?
- Compare the original seal's dimensions: shaft diameter, outer diameter, and width. Also check the lip type and material. If the original has the same dimensions and Lx design, it is compatible. If in doubt, consult us with a photo or the measurements.
- Can I replace the 8948 oil seal with another brand?
- Yes, as long as the dimensions and design type match. Many brands make equivalent seals with the same numerical designation. At MR we help you find the right alternative within the brands we supply, verifying tolerances and application.