DBH 8942 radial shaft seal — 65 x 80 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8942 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8942 and any equivalents.
The DBH 8942 is a radial shaft seal built to keep lubricant in and contaminants out on rotating equipment. It fits a 65 mm shaft, seats in an 80 mm bore, and stands 10 mm tall. The Lx configuration uses a single lip with a spring, making it a practical choice for many gearboxes, pumps, and transmission systems.
This seal carries the code 8942 and is sized by its three main dimensions: shaft diameter 65 mm, housing bore 80 mm, and height 10 mm. The Lx designation points to a single-lip, spring-loaded design intended for lubricated rotating shafts. MR supplies DBH products with their original factory markings and traceability intact.
You will find seals of this size in gearboxes, electric motors, centrifugal pumps, rollers, and other power transmission equipment. Their job is to keep oil or grease inside the assembly while blocking dust, water, and debris from entering. Because the lip wears over time, replace the seal at the first sign of leakage or visible damage to prevent bearing or shaft failure.
Before installation, make sure the shaft is clean and free of burrs or scoring, and that the sealing surface has the proper finish and hardness. Apply a light film of lubricant to the lip, then press the seal squarely into the housing using a tool that contacts only the outer edge. If the bore has a chamfer, use it to guide the part. Avoid striking the spring or distorting the lip.
To get a quote, send the code 8942 or the dimensions 65 x 80 x 10 along with your application details. We can also suggest alternatives in other brands or configurations within the radial shaft seal category. Mention the fluid being sealed, operating temperature, and shaft speed so we can help you select the right part.
Contact MR via WhatsApp with the part number or dimensions, and our team will respond promptly with options that fit your equipment.
Dimensions
- Shaft (d)
- 65mm
- Housing bore (D)
- 80mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8942 seal?
- The DBH 8942 fits a 65 mm shaft, an 80 mm housing bore, and is 10 mm tall. Check these measurements against your shaft and housing before ordering.
- What does the Lx design mean?
- Lx indicates a single-lip, spring-loaded seal for lubricated rotating shafts. It is a common configuration in pumps and transmissions. If you need a different lip arrangement, ask us about alternatives.
- How do I request a quote or find an equivalent?
- Write to us on WhatsApp with the code 8942 or the dimensions 65 x 80 x 10. For equivalents, include the fluid, temperature, and shaft speed. We will respond with suitable options.