DBH 8941 radial shaft seal — 62 x 80 x 10

DBH 8941 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8941 and any equivalents.

The DBH 8941 is a radial shaft seal built for rotating shafts. It keeps lubricant where it belongs and blocks dust, water and other contaminants from reaching the bearing cavity. The designation tells you the size: 62 mm shaft, 80 mm housing, 10 mm height, with an Lx lip configuration. You will find this seal in pumps, motors, gearboxes and similar industrial equipment. MR Industrial Accessories supplies this brand and can help you confirm the right seal for the job.

This seal carries the DBH brand and the code 8941. Reading the size is straightforward: shaft 62 mm, housing 80 mm, width 10 mm. The Lx design uses a sealing lip in a specific construction that holds tight on a rotating shaft. The elastomer lip rides against the shaft surface, while the metal outer case presses firmly into the housing bore. As a replacement part, it shows up often in routine industrial maintenance.

You will typically see this seal in centrifugal pumps, electric motors, gearboxes, compressors and transmission equipment. In each case it protects bearings and gears from outside contamination and stops oil or grease from escaping. Agricultural machinery, conveyors and hydraulic systems also use it where dependable sealing on a rotating shaft matters. At 62x80x10 mm, it fits medium-sized equipment with limited radial space but a real need for an effective barrier.

Installation starts with checking that the shaft measures 62 mm and the housing 80 mm, using tolerances that match the manufacturer's specification. The 10 mm height has to fit the housing depth. Lubricate the lip with the same oil or grease the equipment uses, and inspect the shaft for burrs or marks that could harm the seal. The Lx design may call for a particular lip orientation, so check the drawing or technical data sheet. If the shaft is worn, look at a seal with an auxiliary lip or a wear sleeve.

If you need a seal equivalent to the DBH 8941, send us the full code, the shaft, housing and height dimensions, and a photo or sample of the original. We can also advise on lip material (nitrile, Viton, etc.) based on temperature and working fluid. MR Industrial Accessories helps you find the right part.

To request a quote for the DBH 8941 or ask about an equivalent, message us on WhatsApp or email and mention code 8941. We reply promptly with purchasing options. If the application is unclear, our team can guide you.