DBH 8735Pol radial shaft seal — 22 x 34 x 5

DBH 8735Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8735Pol and any equivalents.

The DBH 8735Pol is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It fits a 22 mm shaft, a 34 mm housing bore and a 5 mm width, with an Lx-R-H lip design. You will find it in pumps, motors, gear reducers and similar machinery where sealing must hold up over long running hours.

The code 8735Pol comes from the DBH line of radial shaft seals. Its three key measurements are shaft 22.00 mm, housing 34.00 mm and width 5.00 mm. The Lx-R-H designation points to a sealing lip, a reinforced outer body and a retaining spring. The compound is chosen for resistance to wear and oils, so the lip keeps working under continuous rotation.

You will see this seal in centrifugal pumps, electric motors, speed reducers, compressors and transmission assemblies. Its job is to shield bearings and gears from dust, water and other outside particles while stopping lubricant from escaping. It suits industrial machinery, process equipment and hydraulic systems where space around the shaft is limited.

Before installing, clean the shaft and housing and remove any burrs. Apply lubricant to the lip, then press the seal in with a proper driver to avoid cutting or distorting it. When selecting a replacement, check shaft speed, operating temperature and the fluid being sealed, and confirm that shaft and housing tolerances match the required fit.

If you need a cross-reference, send the code 8735Pol or the dimensions you require. MR Industrial Accessories can suggest equivalents from its seal and radial shaft seal range and help you choose the right option for the application.