DBH 8733/85 radial shaft seal — 9.3 x 26 x 11
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8733/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8733/85 and any equivalents.
The DBH 8733/85 is a radial shaft seal that keeps lubricant in and contaminants out where a rotating shaft passes through a housing. Its dimensions are 9.30 mm shaft, 26.00 mm housing and 11.00 mm width, making it a compact choice for small pumps, gearboxes and motors with limited space.
As an Lx design, this seal has a single lip and a metal case. The code tells you the size: shaft diameter (d) 9.30 mm, housing bore (D) 26.00 mm, and height (h) 11.00 mm. The 11 mm height provides a solid seat in the housing so the seal stays put once pressed in. It belongs to the radial shaft seals and oil seals category that MR supplies under the DBH brand.
You will find seals like this on low-power electric motors, small centrifugal pumps, compact gearboxes and gear cases, compressors, machine tools, and transmission equipment. They also appear on fan, agitator and light conveyor shafts. In each case the job is the same: separate a lubricated side from an exposed side while the shaft turns, continuously or now and then.
Proper installation starts with checking that your shaft and housing match the listed sizes. The shaft surface should be smooth and free of burrs, since a lip running on a scratched surface wears faster and stops sealing. Lubricate the lip before fitting, keep the seal square to the shaft, and press it in with a tube or shim that contacts the outer edge, not the lip. If the application runs hot, fast, or sees solvents, ask about the lip compound before you request a quote.
If you need an alternative, send the part number 8733/85 along with the shaft and housing diameters you measured. We will check the DBH line and other brands we carry, then let you know if the housing needs modification or if it fits as is. We can also look at design variants when the original seal is no longer available.
To request a quote for the DBH 8733/85 oil seal, message us on WhatsApp with the part number and quantity. If you are unsure about the size or want to compare it with another reference, send a photo of the old part or your caliper readings and we will review it with you.
Dimensions
- Shaft (d)
- 9.3mm
- Housing bore (D)
- 26mm
- Height (h)
- 11.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8733/85 oil seal?
- It is 9.30 mm shaft diameter, 26.00 mm housing diameter and 11.00 mm height, with Lx design. Compare these values with your equipment before ordering.
- How do I check if this oil seal replaces the one I have?
- Measure the shaft, housing and height of the old seal with a caliper. If they match 9.30 x 26.00 x 11.00 mm and the design is single-lip, it is compatible. If not, send us the measurements and we will look for an equivalent.
- Can I ask for an equivalent?
- Yes. Write to us on WhatsApp with the part number 8733/85 and the actual measurements of your equipment. We will review the DBH line and other brands we carry to offer an option and tell you if the housing needs adaptation.