DBH 8706 radial shaft seal — 58 x 75 x 9

DBH 8706 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8706 and any equivalents.

A radial shaft seal in the DBH line, the 8706 keeps lubricant inside the housing and keeps dust, water and other contaminants out. Shaft 58 mm, housing 75 mm, height 9.00 mm. It is a wear item, so once leakage starts or grit gets past the lip, the usual fix is to fit a new seal of the same designation.

The 8706 is built in Lx design, and the code identifies the size within the DBH line. The dimensions to match are shaft 58 mm, housing 75 mm, height 9.00 mm. The outer diameter is pressed into the housing bore while the lip rides on the rotating shaft. Because lip geometry can vary between designs, compare the Lx configuration against the seal you are removing before ordering.

Typical service is in gearboxes, centrifugal pumps, electric motors, line shafts and process equipment where a shaft turns inside a fixed housing and oil has to stay separated from the surrounding environment. In food plants, water treatment and aggregate operations the same seal also keeps dust and liquid away from the bearing. Equipment built around a 58 mm shaft and a 75 mm bore is where this size shows up most often.

Installation starts with a clean housing and shaft, and a check for burrs or scoring on the sealing track. Lubricate the lip, then seat the seal square to the shaft using a tube or spacer that pushes on the outer ring rather than the lip. If the shaft is worn, a sleeve is worth considering. Speed, temperature and the fluid being retained all factor into the final selection.

For an equivalent, send the code 8706 or the dimensions 58 x 75 x 9 mm together with the equipment type. That is enough for our team to check alternatives in the DBH line and among the other brands we supply. We can also advise when housing or shaft tolerances differ and the height or outer diameter has to be adjusted.

If you are unsure about lip orientation, elastomer material or compatibility with the lubricant in use, message us on WhatsApp or by email with the code 8706 and we will help you choose. Quotes are handled by part number and answered promptly.