DBH 8705 radial shaft seal — 36 x 60 x 9.5

DBH 8705 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8705 and any equivalents.

The DBH 8705 is a lip-type radial shaft seal that keeps lubricant in and keeps dust, water and other particles out of rotating assemblies. Its Lx-Bidi configuration provides sealing in both directions, and its dimensions suit shafts and housings where a 36 mm shaft, 60 mm housing and 9.50 mm height are required. MR Industrial Accessories supplies this brand and helps you confirm the right seal for your equipment.

Reading the designation is the quickest way to check a replacement. The 8705 number identifies the seal, while the three values give the bore it runs on, the housing it presses into and its width: shaft 36.00 mm, housing 60.00 mm, height 9.50 mm. The Lx-Bidi code describes the lip layout, with a main lip and a secondary lip that work in both directions to hold lubricant and exclude contaminants. The elastomer body resists oils and greases, and a metal reinforcement gives the seal the rigidity it needs for press fitting.

You will find this type of seal on gearboxes, pumps, electric motors, drive shafts, rollers and process equipment. Food, chemical, petrochemical and manufacturing operations rely on it to prevent oil leaks and keep dirt out of the bearing environment. It is also a practical choice on older or hard-to-reach equipment, where renewing the seal is simpler than replacing the complete assembly.

Before installing, confirm that the shaft, housing and height match the application. The shaft surface should be ground and free of burrs, since a rough finish wears the lip faster. The housing needs the correct diameter and depth plus an entry chamfer so the lip is not cut during fitting. Coat the lip with the same oil used in the equipment, then press the seal in perpendicular to the shaft without striking it directly.

To request a quote for part number 8705, contact us on WhatsApp or by email. We can source an equivalent seal from another brand or series, or review an alternative size in the same category. Send the shaft diameter, housing diameter, height and a photo or sample of the original seal, and we will confirm compatibility and recommend the best option.