DBH 8514Vit radial shaft seal — 95 x 115 x 12

DBH 8514Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8514Vit and any equivalents.

For rotating shafts in gearboxes, pumps and similar equipment, the DBH 8514Vit radial shaft seal handles the job of holding lubricant in and keeping dirt out. It fits a 95 mm shaft, a 115 mm housing bore and a 12 mm width, and its Lx-R-AH configuration pairs a sealing lip with an auxiliary element for tougher service conditions. MR Industrial Accessories supplies this brand and helps you match the right seal to your machine.

Reading the code helps when you order. The 8514Vit designation identifies a DBH radial shaft seal, and the three figures that matter most are shaft 95 mm, housing 115 mm and width 12.00 mm. The Lx-R-AH build means the lip works alongside a secondary element that shields it from dust and grit. The lip compound is chosen to stand up to the oils and greases found in industrial drives, while the metal outer case presses firmly into the bore and stays put.

You will find seals of this size on gearboxes, reducers, centrifugal pumps, electric motors and other power transmission components. In each case the seal keeps lubricant where it belongs and stops outside particles from reaching bearings and gears, where they would speed up wear. The dimensions suit medium to large equipment running at moderate shaft speeds, including setups where vibration or higher temperatures are part of normal operation.

Installation rewards a little care. Inspect the shaft first and remove any burrs, nicks or scratches that could cut the lip. Coat the lip with the same oil or grease used in the machine, then press the seal in squarely so it sits perpendicular to the shaft, either flush with the housing or slightly recessed as the design calls for. When you pick a replacement, confirm shaft, housing and width, and also check the elastomer type and lip style. If the original has a special configuration, send us the details and we will review the equivalent.

To get a quote, message us on WhatsApp with the code 8514Vit or the dimensions 95x115x12 mm. We can also search for alternatives in the same seal category, keeping the critical dimensions and the application in mind. If you need guidance on fitting or on practices that help the seal last longer, ask us and we will walk you through it.