DBH 8506Pol radial shaft seal — 45 x 68 x 8.5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8506Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8506Pol and any equivalents.
For rotating shafts that need a dependable barrier against lubricant loss and outside contamination, the DBH 8506Pol radial shaft seal is a practical choice. It fits a 45 mm shaft, a 68 mm housing and has an 8.50 mm height. MR Industrial Accessories LLC supplies this seal and helps maintenance and purchasing teams confirm the right option for their equipment.
This lip seal belongs to the DBH line and carries the code 8506Pol. The dimensions to check before ordering are: shaft 45 mm, housing 68 mm, width 8.50 mm. Its Lx-R-H configuration combines a sealing lip, a reinforced body and an outer cover. The result is a seal built for rotating shafts where oil or grease must stay in and dust, water and other particles must stay out.
You will find seals like the 8506Pol in gearboxes, centrifugal pumps, electric motors, transmission shafts and general industrial machinery. They also show up in agricultural equipment, conveyor systems and hydraulic circuits. Because they handle moderate peripheral speeds and low pressures, they suit many setups where a shaft turns inside a fixed housing and dependable sealing is required.
Proper installation matters as much as the seal itself. Inspect the shaft for burrs or wear and make sure the housing is clean and free of damage. Apply the same oil or grease used in service to the lip before fitting the seal. Press on the outer diameter only, never on the lip. If the shaft track is worn, look at a seal with an offset lip or a repair sleeve. Speed, temperature and fluid type all influence the final selection.
If you need a close variant or a matching size, send the code 8506Pol or your shaft and housing dimensions. MR Industrial Accessories LLC can review options in the same DBH brand or in other lines we carry. We also help with lip type, material and design based on your operating conditions.
To ask about this seal or any other sealing component, message us on WhatsApp with the code. We reply with the technical details you need to keep your purchase moving.
Dimensions
- Shaft (d)
- 45mm
- Housing bore (D)
- 68mm
- Height (h)
- 8.50mm
- Design
- Lx-R-H
Frequently asked questions
- What are the dimensions of the DBH 8506Pol oil seal?
- The DBH 8506Pol oil seal has a 45 mm shaft diameter, a 68 mm housing diameter and an 8.50 mm height. These match the standard designation. Always verify the shaft and housing before installation.
- What applications is this oil seal suitable for?
- It is used on rotating shafts in gearboxes, pumps, electric motors and transmission equipment. Its Lx-R-H design seals against oils and greases and protects against dust and water. It handles moderate speeds and low pressures typical of general industry.
- How do I request an equivalent size or a variant?
- Write to us on WhatsApp with the code 8506Pol or with your shaft and housing dimensions. MR Industrial Accessories LLC reviews the applicable options in DBH and in other brands we supply, then sends you the technical choices so you can pick the most convenient one.