DBH 8501Pol radial shaft seal — 70 x 92 x 12
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8501Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8501Pol and any equivalents.
For rotating shafts that need a dependable barrier between lubricant and the outside environment, the DBH 8501Pol radial shaft seal is a lip seal that press-fits into the housing and rides on the shaft. Its 70 mm shaft diameter, 92 mm housing bore and 12.00 mm height suit medium-size shafts. The flexible lip absorbs small misalignments, helping maintain sealing integrity in gearboxes, pumps and motors.
The 8501Pol designation follows an Lx-H layout. The three dimensions to check are shaft 70 mm, housing bore 92 mm and height 12.00 mm. A metal reinforcement gives the seal the rigidity needed for press fitting, while the elastomer lip is built to resist wear as it runs against the shaft. The lip keeps oil or grease in and keeps dust and water out.
You will find this seal in gearboxes, reducers, centrifugal pumps, electric motors and conveyor rollers. In each case it protects internal bearings from external contamination and prevents lubricant loss. Its size makes it common in general industrial power transmission equipment, where shafts turn at moderate speeds and reliable sealing matters.
Selection starts with matching the shaft, housing bore and height to your equipment. The shaft surface should be clean, free of burrs and scratches, and hard enough not to damage the lip. Lubricate the lip with the same oil or grease it will retain, then press the seal in perpendicular to the housing. If the shaft shows wear, an auxiliary lip may be worth considering.
If the exact size is not listed or you need an equivalent, send the code 8501Pol or the dimensions 70x92x12 mm via WhatsApp or email. The team can suggest alternatives and help you confirm the right radial shaft seal for your equipment.
DBH is one of the brands MR supplies, so you can ask about this radial shaft seal and the rest of the seal line. Proper installation and periodic maintenance help extend service life and reduce unplanned downtime. The technical team is available to help you choose the best option for your application.
Dimensions
- Shaft (d)
- 70mm
- Housing bore (D)
- 92mm
- Height (h)
- 12.00mm
- Design
- Lx-H
Frequently asked questions
- What are the dimensions of the DBH 8501Pol radial shaft seal?
- The DBH 8501Pol radial shaft seal has a 70 mm shaft diameter, a 92 mm housing bore and a 12.00 mm height. These correspond to the 8501Pol designation and are the values to verify on your equipment before replacement.
- What type of applications is this radial shaft seal suitable for?
- It is used on rotating shafts of gearboxes, pumps, motors and transmission equipment. Its function is to retain lubricant and exclude dust and water. It is suitable for moderate speeds and general industrial working conditions.
- How do I request a quote or an equivalent?
- Write to us via WhatsApp with the code 8501Pol or the dimensions 70x92x12 mm. At MR Industrial Accessories we will quote you and, if needed, look for an equivalent from another brand for your application.