DBH 8499/85 radial shaft seal — 27 x 39 x 10.5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8499/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8499/85 and any equivalents.
The DBH 8499/85 is a radial shaft seal built for rotating shafts. It keeps lubricant where it belongs, inside the housing, and blocks dust, water and particles from reaching bearings and gears. The size to check before ordering is shaft 27 mm, housing 39 mm, height 10.50 mm, with an A 070 design. MR supplies this brand and can review your application with you.
The code breaks down simply: DBH is the brand, 8499/85 identifies the seal. On the dimensional side, the bore it sits in measures 39 mm, the shaft it rides on measures 27 mm, and the cross-section height is 10.50 mm. The A 070 designation describes a standard single lip with spring, a layout commonly found on rotating shafts. Those three measurements and the design have to line up with your equipment for the seal to do its job.
You will run into seals like this one in gearboxes, pumps, electric motors, reducers, conveyor rollers and other power transmission assemblies. The job is always the same: hold oil or grease in and keep contamination out. That makes them small parts with a large effect on maintenance planning, because a worn lip can lead to leaks, bearing damage and unplanned downtime.
Installation matters as much as the part number. Clean the shaft and housing, remove burrs and marks, then coat the lip with the same lubricant the equipment uses. Drive the seal in squarely, never by hitting the lip directly, using a tube or press that contacts the outer circumference. Rotation speed, operating temperature and lubricant type all influence which seal is correct.
If you are replacing an existing seal, the fastest route is to send the code 8499/85 or the three dimensions of the part in your hand. If the A 070 configuration does not suit the application, our team can look at other brands or configurations that fit the same space. Send the details by WhatsApp or email and we will get back to you with a quote.
Dimensions
- Shaft (d)
- 27mm
- Housing bore (D)
- 39mm
- Height (h)
- 10.50mm
- Design
- A 070
Frequently asked questions
- What size is the DBH 8499/85 oil seal?
- Shaft 27 mm, housing 39 mm, height 10.50 mm. Confirm these against your shaft and bore before installing.
- What does A 070 mean in this seal?
- It indicates a standard single lip with spring, a common configuration for rotating shafts. It seals against lubricant loss and keeps contaminants out.
- How do I ask for a quote or an equivalent?
- Message us on WhatsApp or email with the code 8499/85, or with the shaft, housing and height measurements of your current seal. We will quote it and, if needed, suggest alternatives.