DBH 8362/85 radial shaft seal — 29 x 47 x 6
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8362/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8362/85 and any equivalents.
The DBH 8362/85 is a radial shaft seal designed to retain lubricant and block contaminants from entering rotating equipment. It fits a 29 mm shaft, a 47 mm housing bore and has a 6.00 mm height, with an Lx design that indicates a single lip with spring. This seal is commonly used in gearboxes, pumps, electric motors and other power transmission assemblies.
The part number 8362/85 belongs to the DBH line of oil seals. Its key dimensions are: shaft diameter (d) 29 mm, housing diameter (D) 47 mm and height (h) 6.00 mm. The Lx designation means it has a single lip with a spring, which is standard for rotating shafts that require lubrication. The elastomeric lip seals against the shaft while the metal case holds the seal in the housing.
Typical uses for a seal of this size include gearboxes, centrifugal pumps, electric motors, compressors, spindles and power transmission components. In each case, its role is to keep oil or grease inside and keep dust, water and particles out. Because it is a wear part, it should be replaced when leaks or unusual noise appear at the sealing area.
When installing the DBH 8362/85, check that the shaft is free of burrs and wear, and that the housing is clean and not deformed. Lubricate the lip with the same lubricant used in the equipment, then press the seal in with a flat tool to avoid damaging the lip. Selection should take into account shaft speed, operating temperature and the fluid being sealed. If the shaft has a worn track, you may need a different size or a repair sleeve.
If you are looking for an equivalent oil seal, send us the part number 8362/85 or the shaft, housing and height dimensions. It also helps to include the equipment where it is mounted and a photo of the part. With that information, we can check our seals and oil seals line and confirm the best alternative for your application.
To request a quote for the DBH 8362/85 oil seal, contact us via WhatsApp or email with the part number or dimensions. Our team will respond promptly with the technical details you need to complete the replacement.
Dimensions
- Shaft (d)
- 29mm
- Housing bore (D)
- 47mm
- Height (h)
- 6.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8362/85 oil seal?
- The DBH 8362/85 oil seal has a shaft diameter (d) of 29 mm, a housing diameter (D) of 47 mm and a height (h) of 6.00 mm. These dimensions are critical for verifying compatibility with your equipment.
- What applications is this oil seal suitable for?
- It is used in gearboxes, pumps, electric motors, compressors and power transmission equipment. Its function is to retain lubricant and prevent the entry of contaminants. It is a wear part that should be replaced when leaks or noise appear.
- How do I request an equivalent size or a replacement?
- Contact us via WhatsApp or email with the part number 8362/85 or with the shaft, housing and height dimensions. If possible, include a photo of the part and the equipment where it is mounted. We will then provide the best alternative from our oil seals line.