DBH 8360/85 radial shaft seal — 18 x 33.3 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8360/85 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8360/85 and any equivalents.
The DBH 8360/85 is a radial shaft seal with an Mx lip design. It keeps oil or grease inside and blocks dust or water where a shaft turns through a housing. You will find it on gearboxes, pumps, electric motors and other power transmission equipment. The seat dimensions are 18 mm shaft, 33.30 mm housing and 8.00 mm height, which puts it in the small end of the range. MR Industrial Accessories LLC supplies this brand and quotes by part number.
The code 8360/85 identifies this size in the DBH line. The three figures that matter for replacement are shaft 18 mm, housing 33.30 mm and height 8.00 mm. Compare all three against the old part or the drawing. A seal pressed into a housing that is too small, or one that spins on the shaft, will lose its lip quickly once the equipment runs.
Typical locations include gearboxes and gearmotors, centrifugal pumps, electric motors, small compressors, fan shafts and machine tools. In dusty or wet areas the seal also acts as a barrier against contaminants. Whenever the equipment is opened, inspect the lip and the garter spring before refitting.
Before installation, check the shaft surface for grooves or roughness; a worn shaft will not seal even with a new lip. Clean the housing and remove any burrs. Lubricate the lip with the same oil or grease used in the equipment, seat the seal perpendicular to the shaft and press it in evenly to the bottom. Do not strike the lip with a metal tool.
To request a quote, send the full part number 8360/85 and the housing dimensions. We can search for an equivalent in the DBH line or in other brands we carry, always matching shaft, housing and height. A photo of the old seal next to a caliper helps confirm the size and lip type.
MR Industrial Accessories LLC serves customers across the United States and in several Latin American countries. Send the part number by WhatsApp or email and our team will reply promptly, suggest equivalents and help you choose the right seal.
Dimensions
- Shaft (d)
- 18mm
- Housing bore (D)
- 33.3mm
- Height (h)
- 8.00mm
- Design
- Mx
Frequently asked questions
- What are the dimensions of the DBH 8360/85 seal?
- Shaft 18 mm, housing 33.30 mm and height 8.00 mm, with Mx design. These are the three dimensions to compare against the shaft and housing before installing.
- How do I ask for an equivalent if the 8360/85 is not available?
- Send the part number and the shaft, housing and height dimensions by WhatsApp or email. We will look for an equivalent in the DBH line or other brands we supply, keeping the same seat dimensions.
- What should I check before installing a radial shaft seal?
- Check that the shaft has no groove or roughness, that the housing is clean and free of burrs, and lubricate the lip with the same oil or grease used in the equipment. The seal must go in perpendicular and all the way to the bottom, without blows on the lip.