DBH 8208 radial shaft seal — 45 x 63 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8208 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8208 and any equivalents.
The DBH 8208 radial shaft seal is a lip seal that fits into a housing and seals against a rotating shaft, keeping lubricant in and contaminants out. It measures 45 mm on the shaft, 63 mm in the housing and 7.00 mm in height, and uses the Lx design. You will find it in gearboxes, pumps, electric motors and other power transmission equipment with rotating shafts. MR Industrial Accessories supplies this brand and can help you select the right seal.
This seal belongs to the DBH line and carries the code 8208. Its dimensions are shaft 45 mm, housing 63 mm and height 7.00 mm. The Lx design is a single-lipped seal with a spring, made for rotating shafts that run with lubrication. The lip presses against the shaft while the outer diameter seats in the housing, so oil or grease stays inside and dust, water or particles stay out.
Seals of these dimensions are common in gearboxes, centrifugal pumps, electric motors, compressors, mixers and belt or chain drive systems. In each case, the seal protects bearings and gears from dirt and stops lubricant from leaking. You will also find them in machine tools, washing equipment and conveyors that need a dependable shaft seal.
When installing, inspect the shaft for burrs, wear or splines, and make sure the housing is clean and undistorted. Lubricate the lip before fitting, then press the seal in with a tube or sleeve that contacts the outer diameter, never the lip. Keep shaft and housing runout to a minimum to avoid shortening seal life. If the shaft has a wear groove, consider a seal that positions the lip in a different location.
If you need an equivalent to the 8208, send the code, the shaft, housing and height dimensions, and a photo of the old seal. With that information we look for alternatives in other brands or lines that keep your equipment running. We can also advise you if the Lx design is not right for your application and a different lip type or material would work better.
To request a quote for the DBH 8208 seal, contact us on WhatsApp or by email. At MR Industrial Accessories we reply promptly with technical information and a quote. Include the code and your equipment dimensions so we can assist you.
Dimensions
- Shaft (d)
- 45mm
- Housing bore (D)
- 63mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8208 seal?
- The DBH 8208 seal has a 45 mm shaft diameter, a 63 mm housing diameter and a 7.00 mm height. These are the nominal dimensions and match the 8208 designation. If your shaft or housing is worn, verify before installing.
- What type of application is this seal for?
- It is for rotating shafts in gearboxes, pumps, motors and transmission equipment. Its function is to retain lubricant and prevent the entry of contaminants. The Lx design is suitable for applications with lubrication and moderate speeds.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp or email with the code 8208, the dimensions of your shaft and housing, and a photo of the seal. At MR Industrial Accessories we send you the quote and, if needed, look for an alternative compatible with your equipment.