DBH 8207Sil radial shaft seal — 48 x 70 x 9
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8207Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8207Sil and any equivalents.
The DBH 8207Sil is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It measures 48 mm at the shaft, 70 mm at the housing bore and 9.00 mm in height, and it uses the Lx design. MR Industrial Accessories supplies this seal and helps you match the right one to your application.
The part number 8207Sil identifies this seal. Its dimensions are shaft 48 mm (d), housing 70 mm (D) and height 9.00 mm (h). The Lx design is a single lip with a spring, intended for rotating shafts. The lip contacts the shaft while the outer case sits press-fit in the housing bore. Seals in this size range are commonly replaced during maintenance.
You will find seals of this size in gearboxes, centrifugal pumps, electric motors, compressors and transmission rollers. They do two jobs at once: hold oil or grease inside the assembly and keep dust, water and particles from getting in. Washing equipment, food processing lines and agricultural machinery also use them, since bearing life depends on keeping water and dust out.
Before installing, inspect the shaft for burrs or wear and make sure the housing bore is clean and round. Apply lubricant to the lip, then press the seal in with a tube that contacts the metal case, not the lip. If the shaft has a worn track, a seal with the lip in a different position may be needed. Speed, temperature and the fluid being retained all affect the choice.
For an equivalent, send the complete code 8207Sil, or the shaft, housing and height measurements. A photo of the old seal or the housing also works. MR Industrial Accessories checks that information against the available options and confirms the best fit. We supply seals, bearings and power transmission components for industry.
To request a quote for the DBH 8207Sil, message us on WhatsApp with the code 8207Sil. We will reply with compatible alternatives.
Dimensions
- Shaft (d)
- 48mm
- Housing bore (D)
- 70mm
- Height (h)
- 9.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 8207Sil seal?
- Shaft 48 mm, housing 70 mm and height 9.00 mm. Confirm these against your housing before installation.
- What does the Lx design indicate on this seal?
- Lx means a single lip with a spring, for rotating shafts. It is a common design for retaining lubricant and excluding contaminants. If your equipment needs a different configuration, ask us.
- How do I ask for an equivalent size?
- Send the code 8207Sil or the shaft, housing and height dimensions on WhatsApp. A photo of the old seal also helps. We will list the alternatives and confirm which one fits.