DBH 8038Pol radial shaft seal — 42 x 56 x 7

DBH 8038Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8038Pol and any equivalents.

The DBH 8038Pol is a radial shaft seal built to keep lubricant in and contaminants out of rotating equipment. Its dimensions are shaft 42.00 mm, housing 56.00 mm and height 7.00 mm, matching the 8038Pol designation. MR Industrial Accessories LLC supplies this brand and helps US maintenance teams confirm the right seal for the job.

This seal carries the 8038Pol code and the Lx-R design, which means a sealing lip with a spring. The lip elastomer works with the metal body to hold oil or grease inside while blocking dust, water and particles. Before you order, check the three dimensions: shaft 42.00 mm, housing 56.00 mm and height 7.00 mm.

You will find this type of seal on gearboxes, pumps, electric motors, drive shafts and process equipment. Because it is a wear part, replace it when you notice dripping, unusual noise or shaft play. Keeping the seal in good condition protects nearby bearings from premature damage.

During installation, make sure the shaft and housing are clean and free of burrs. Lubricate the lip with the same oil or grease used in service, then press the seal in squarely with a suitable tube or press. Avoid hitting the lip. If the shaft shows wear, an auxiliary lip may be worth considering. Selection depends on speed, temperature and the lubricant in use.

To request a quote, send the 8038Pol code or the 42x56x7 dimensions by WhatsApp or email. If you need an alternative, the team can suggest equivalents in other brands or configurations. Share your equipment data and they will help you choose so the part performs as intended.