DBH 8037Sil radial shaft seal — 34.93 x 47.65 x 6.35
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8037Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8037Sil and any equivalents.
A radial shaft seal in the DBH line, the 8037Sil keeps lubricant where it belongs and blocks dust, water and other contaminants from reaching the bearing cavity. It fits a shaft of 34.93 mm, a housing bore of 47.65 mm and a width of 6.35 mm, so it suits assemblies with minimal axial room. MR Industrial Accessories supplies this brand for maintenance teams replacing a worn seal.
Reading the code helps when you compare it against the old part. The 8037Sil belongs to the DBH family and uses the Lx design: one lip with a spring inside, built to hold oil or grease on a rotating shaft. The elastomer body and the spring work together to keep contact pressure even around the shaft.
Typical installations include gearboxes, pumps, electric motors, compressors and transmission units, anywhere a shaft passes through a housing and the joint has to stay sealed. Agricultural machinery, process lines and centralized lubrication systems use this size often. The narrow profile fits spots where a wider seal will not go, as long as the shaft and bore match the stated dimensions.
Before fitting, check the shaft for burrs, scoring or wear and make sure the housing is clean and not distorted. Coat the lip with the same oil or grease the equipment runs on, then seat the seal squarely. When selecting a replacement, weigh peripheral speed, operating temperature and how the elastomer reacts to the fluid in contact. If the original carries a different code, an equivalent size can usually be sourced.
Have the code 8037Sil or your measured dimensions ready and send them over WhatsApp or email. If your housing bore is slightly off from 47.65 mm, mention it and the team can advise on the closest match.
For installation questions or compatibility checks, share the technical data sheet for your equipment. The reply will include specific options to help you avoid repeat leaks, and a quote follows from there.
Dimensions
- Shaft (d)
- 34.93mm
- Housing bore (D)
- 47.65mm
- Height (h)
- 6.35mm
- Design
- Lx
Frequently asked questions
- What size is the DBH 8037Sil seal?
- It is built for a 34.93 mm shaft, a 47.65 mm housing bore and a 6.35 mm width. Confirm these values on your equipment before ordering.
- Where is this radial shaft seal used?
- Gearboxes, pumps, motors and similar rotating equipment that needs to retain lubricant and keep out dust or water. Continuous rotation is fine as long as speed and temperature stay within the elastomer's range.
- How do I get a quote or an equivalent?
- Send the code 8037Sil or your seal dimensions by WhatsApp or email. The team will check equivalent options and reply with concrete choices.