DBH 8023Pol radial shaft seal — 15 x 30 x 6.35
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 8023Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8023Pol and any equivalents.
The DBH 8023Pol is a radial shaft lip seal that keeps lubricant where it belongs and blocks dirt from reaching a rotating shaft. With a 15 mm shaft, a 30 mm housing bore and a 6.35 mm height, it fits assemblies where there is little room along the axis. MR Industrial Accessories supplies this brand and helps you match the seal to your equipment.
Reading the code: 8023Pol is the size and build reference inside the DBH line, and Mx describes the construction, a metal body combined with a sealing lip. The three figures that matter when ordering are shaft 15 mm, housing bore 30 mm and height 6.35 mm. Those values decide whether the seal seats correctly and whether the lip runs on the right surface.
Typical duty covers gearboxes, pumps, electric motors, compressors and other power transmission units where a 15 mm shaft turns inside a 30 mm bore. Moderate-speed operation with dust or moisture present is where this type of seal earns its place, since the aim is to shield bearings and gears from both lubricant loss and outside contamination. Agricultural equipment, washing systems and pumping installations are common examples.
Installation notes: the shaft and bore should be clean, with no burrs, scratches or leftover gasket material. Apply the same oil or grease the unit runs on to the lip before fitting, and drive the seal in with a tube that contacts only the outer diameter, keeping pressure off the lip. Peripheral speed, operating temperature and the fluid being sealed all influence selection, so share your equipment data if anything is unclear.
If the height, width or material needs to change, or you want a comparable size, send the 8023Pol code or your three dimensions. Alternatives can be sourced within the DBH line or from other brands we supply, keeping tolerances and seal design in mind.
Quotes are handled by WhatsApp or email at MR Industrial Accessories. Send the part number and the team will respond promptly, suggest equivalents and help you confirm the right choice.
Dimensions
- Shaft (d)
- 15mm
- Housing bore (D)
- 30mm
- Height (h)
- 6.35mm
- Design
- Mx
Frequently asked questions
- What size is the DBH 8023Pol seal?
- It takes a 15 mm shaft, a 30 mm housing bore and a 6.35 mm height, which is what the 8023Pol reference defines.
- How do I check that it fits my unit?
- Measure the shaft, the bore and the axial space, and compare them with 15 mm, 30 mm and 6.35 mm. Speed, temperature and the fluid also matter; send us your machine details and we will review them.
- Can I get an equivalent or a different brand?
- Yes. Send the 8023Pol code or your dimensions on WhatsApp and we will look for alternatives in DBH or other brands we carry, matching the size and sealing type.