DBH 6885Vit radial shaft seal — 35 x 47 x 7

DBH 6885Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6885Vit and any equivalents.

Part 6885Vit is a radial shaft seal from the DBH line, built to sit in the housing bore and ride against a turning shaft so that lubricant stays inside the machine and outside contamination stays out. Its dimensions are 35.00 mm for the shaft, 47.00 mm for the housing bore and 7.00 mm for the height, with the Lx-R design covering the lip and outer body geometry. MR Industrial Accessories LLC carries this seal within its seals and shaft seal range.

The reference breaks down simply: 6885Vit is the item number, while the numbers behind it describe the fit. Shaft side measures 35.00 mm, bore side 47.00 mm and overall height 7.00 mm. Because the cross section is slim, this seal suits 35 mm shafts where there is little room along the axis but a dependable closure is still required. The Lx-R designation tells you how the lip and the outer body are shaped, which matters when you compare it against what came out of the machine.

You will find seals in this size range on gear reducers, centrifugal pumps, electric motors, transmission shafts and process equipment, as well as on washing, conveying and agricultural machinery where grit and moisture are normal. Whatever the machine, the job does not change: hold the oil or grease in, keep dust, water and particles out.

Picking the right seal takes more than matching three numbers. Shaft surface speed, operating temperature, the lubricant in use and any pressure difference across the seal all affect the choice, and the Lx-R geometry together with the lip compound determines which fluids it can handle. On installation, coat the lip, seat the seal square to the shaft and press it in without hammering the edge. A scored shaft or a damaged bore will shorten the life of any new seal.

If you need another lip material or a cross-reference from a different brand, send the number 6885Vit or the 35 x 47 x 7 mm dimensions along with a description of the application. Telling us whether the seal sees oil, grease, water or chemicals helps us narrow the recommendation, either inside the DBH line or among the other brands we supply.

To get a quote on the DBH 6885Vit seal, message the part number to MR Industrial Accessories LLC on WhatsApp or by email. If the size or design is unclear, a photo of the old seal or of the housing is usually enough for us to confirm the reference, and we can also walk you through installation and care.