DBH 6885Pol radial shaft seal — 35 x 47 x 7

DBH 6885Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6885Pol and any equivalents.

For rotating equipment that needs reliable lubricant retention, the DBH 6885Pol oil seal is a radial shaft seal sized for a 35 mm shaft, a 47 mm housing bore and a 7 mm width. Its Lx-R lip arrangement combines a spring-loaded main lip with a secondary exclusion lip. MR supplies this brand and can help you confirm the correct seal for your machine.

The designation 6885Pol identifies this radial shaft seal. In metric terms, it fits a shaft of 35.00 mm, a housing of 47.00 mm and a height of 7.00 mm. The Lx-R layout means the primary sealing lip is spring-supported and works alongside a second lip intended to keep out dust and water. Because MR carries the DBH brand, the seal arrives with its original identification.

You will find this seal in centrifugal pumps, electric motors, gear reducers, rollers and transmission shafts. It sits in a fixed housing and rides on the rotating shaft, keeping oil or grease on one side and the environment on the other. The exclusion lip is an advantage where dirt or moisture is moderate, since it shields the main lip and helps extend seal life.

During installation, confirm that the shaft and housing are clean and free of burrs or scratches, and that the measured dimensions match the seal. Apply lubricant to the lip before fitting, and avoid impacts that could deform it. Selection should account for rotation speed, operating temperature and the lubricant in use. If the shaft is worn, a sleeve or a different lip configuration may be needed.

If you need an equivalent, send the code 6885Pol or the dimensions 35 x 47 x 7 mm through WhatsApp. Include the equipment, the brand of the original seal and a photo if possible. With that information, MR looks for alternatives in the same seals and oil seals category, keeping the shaft, housing and height dimensions so the replacement fits properly.

To request a quote for the DBH 6885Pol seal, contact us on WhatsApp and mention the code or the dimensions. We will quote that size and any equivalent variants we carry. If you are unsure about installation or selection, our technical team can advise based on your application and working conditions.