DBH 6034 radial shaft seal — 69.85 x 103.15 x 12.7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6034 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6034 and any equivalents.
A radial shaft seal from DBH, part number 6034, built for a 69.85 mm shaft. The housing bore measures 103.15 mm and the seal height is 12.70 mm. Its job is to keep lubricant where it belongs and to keep dust, water and other contaminants out of the bearing area. Because the lip wears over time, this is a part that gets replaced on a maintenance schedule or as soon as a leak shows up.
The 6034 uses the Lx design: one sealing lip with a spring, meant for rotating shafts that run with continuous lubrication. The lip rides against the shaft while the outer diameter presses into the housing bore, closing off the path where oil or grease would otherwise escape.
You will find this seal in gearboxes, centrifugal pumps, electric motors, conveyor rollers and other power transmission equipment. It also shows up in food, chemical and process plants, where holding lubricant in and keeping the environment out of the bearing cavity matters. Any assembly with a shaft turning inside a lubricated housing depends on this type of component.
When selecting a replacement, confirm all three dimensions against the shaft and housing: shaft 69.85 mm, housing 103.15 mm, width 12.70 mm. Look at the shaft surface as well. Burrs, deep scratches or worn areas will keep the lip from making even contact. During installation, coat the lip with the same oil or grease used in the equipment, press the seal in square to the shaft, and use a driver that will not distort the metal case.
To get a quote for part number 6034, send the measurements of the old seal or the number stamped on it. With that information we can search for an equivalent in the same brand or in another seal line we supply. If space allows, we can also propose an option with the same shaft and housing diameters but a different height or lip style.
MR Industrial Accessories supplies the DBH brand as part of its seals and oil seals line. To confirm that the 6034 fits your application or to request a quote, message us on WhatsApp with the part number and your equipment dimensions. We will reply with the quote and any compatible options.
Dimensions
- Shaft (d)
- 69.85mm
- Housing bore (D)
- 103.15mm
- Height (h)
- 12.70mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 6034 oil seal?
- Shaft 69.85 mm, housing 103.15 mm, height 12.70 mm. These are the nominal figures from the designation. Compare them with the original part before installing.
- What type of shafts is this seal used for?
- It is a single-lip radial shaft seal with spring, intended for rotating shafts under continuous lubrication. Typical uses include gearboxes, pumps, motors and transmission equipment. It is not designed for shafts with significant axial movement or for high-pressure service.
- How do I request a quote for the 6034 oil seal?
- Send us a WhatsApp message with part number 6034 and the dimensions of your equipment. We will provide the quote and compatible alternatives, and we can look for an equivalent if you need a different size.