DBH 6032 radial shaft seal — 71.44 x 101.68 x 11.9
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 6032 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6032 and any equivalents.
The DBH 6032 is a radial shaft seal that keeps lubricant in and contaminants out of rotating equipment. It fits a 71.44 mm shaft, a 101.68 mm housing and has a height of 11.90 mm. The Lx design adds a secondary dust lip to the main sealing lip, so it handles moderate dirt without letting particles reach the bearing. MR supplies this brand and helps you confirm the right seal for your machine.
This seal carries the DBH brand and part number 6032. Its three key dimensions are: shaft 71.44 mm, housing 101.68 mm, width 11.90 mm. In the Lx configuration, the primary lip runs against the shaft to hold oil or grease, while the secondary lip faces outward to block dust and water. The outer diameter presses into the housing bore to create a static seal.
You will find radial shaft seals like the DBH 6032 in gear reducers, pumps, electric motors, drive shafts and process lines. They are common in food processing, chemical plants and material handling, where dust, washdown or splashes are present. They also solve problems on older or imported equipment, where matching the original size avoids machining the shaft or housing.
Before installation, inspect the shaft for burrs or grooves and make sure the housing bore is clean and round. Coat the lip with the same oil or grease used in the equipment. If the shaft shows a wear track, you can shift the seal slightly or use a repair sleeve. Selection depends on speed, temperature and the fluid being sealed; the Lx design is a good choice when ambient dust or dirt is expected.
To get a quote, send the full part number, the shaft, housing and height dimensions, and a photo of the old seal if you have one. With that information we can check our seal lines for alternatives. We can also tell you whether a taller or shorter seal fits the space, or if a metal dust lip design would work better.
For a quote on the DBH 6032 oil seal, message us on WhatsApp or email and mention part number 6032. MR replies with the options that match your equipment. If you need help with installation or compatibility, our team can guide you to the best choice.
Dimensions
- Shaft (d)
- 71.44mm
- Housing bore (D)
- 101.68mm
- Height (h)
- 11.90mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 6032 oil seal?
- The DBH 6032 oil seal has a shaft diameter of 71.44 mm, a housing diameter of 101.68 mm and a height of 11.90 mm. These are the nominal dimensions. If your shaft or housing is worn, verify with a caliper before ordering.
- What is the Lx design for?
- The Lx design combines a main sealing lip with an external dust lip. The main lip retains lubricant; the dust lip keeps out dust, water and particles. It suits dirty environments or frequent washdowns where a simple seal is not enough.
- How do I request a quote or an equivalent?
- Message us on WhatsApp or email with part number 6032 and your seal dimensions. If you cannot find the exact size, send the shaft, housing and height diameters, and we will offer compatible alternatives. We can also evaluate other designs for your application.