DBH 5427Pol radial shaft seal — 35 x 47 x 7

DBH 5427Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5427Pol and any equivalents.

For rotating equipment, the DBH 5427Pol radial shaft seal keeps lubricant in and contaminants out. It is a lip seal with a metal case and elastomer element that presses into the housing and rides against the shaft. The dimensions are 35 mm for the shaft, 47 mm for the housing and 7.00 mm for the height, and the design is Lx. MR Industrial Accessories supplies this seal and can help you confirm it is the right replacement.

This seal carries the code DBH 5427Pol. The numbers in that code correspond to a 35 mm shaft, a 47 mm housing bore and a 7.00 mm overall height, with Lx design. It is used in gearboxes, pumps, motors and bearing arrangements to retain oil or grease and to block dust, water and other particles from reaching the bearing.

Seals like this one are wear parts. They are common in gearboxes, centrifugal pumps, electric motors, transmission shafts and continuous process lines. When the lip wears, you may notice oil loss, unusual noise or shaft play. At that point, replacing the seal protects the bearing and avoids bigger repairs.

Before installation, clean the shaft and housing and remove any burrs or marks. Lubricate the lip, then press the seal in squarely without hammering on the case. For a replacement, check shaft, housing and height dimensions, the lubricant type and the rotation speed. An equivalent with the same critical dimensions can be considered.

To request a quote, send the code 5427Pol or the dimensions 35 x 47 x 7 mm by WhatsApp or email. The team checks the data against the manufacturer's data sheet and suggests compatible alternatives. They can also review the condition of the shaft and housing to recommend the right seal.