DBH 5362 radial shaft seal — 54 x 81 x 11.9

DBH 5362 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5362 and any equivalents.

The DBH 5362 is a radial shaft seal with an Lx design, meaning it has a sealing lip and a metal case. It fits a 54 mm shaft, an 81 mm housing bore and an 11.90 mm width. This seal keeps lubricant in and contaminants out of rotating equipment such as gearboxes, pumps, motors and power transmission drives. MR Industrial Accessories supplies it within its seals and radial shaft seals range for maintenance and replacement work.

The code 5362 identifies this seal within the DBH line. To read it, note the three dimensions: shaft 54 mm, housing 81 mm, width 11.90 mm. The Lx design refers to the lip and case combination. These values come from the manufacturer's product data and should be checked against the actual shaft and bore before ordering.

You will find seals of this size in gearboxes, reducers, centrifugal pumps, electric motors, rollers and power transmission components. In each case the job is the same: hold oil or grease in place and keep dust, water and particles away from the bearings. The dimensions suit medium-sized industrial equipment running at moderate shaft speeds and normal operating temperatures.

Proper installation starts with clean, burr-free shaft and housing surfaces. Apply the same oil or grease used in the machine to the seal lip, then press the seal in with a support tube that contacts the metal case, not the lip. The 11.90 mm width must match the housing depth; if the space differs, a seal of another width may be needed. Shaft runout and surface finish also affect how long the seal lasts.

If you are looking for an equivalent, send the code 5362 or the dimensions 54 x 81 x 11.90 by WhatsApp or email. With that information we can search for alternatives in the same radial shaft seal category, whether a small change in shaft or housing diameter or a different design that suits your equipment. We can also help if the original seal uses a particular material or lip feature.