DBH 5198 radial shaft seal — 55 x 80 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5198 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5198 and any equivalents.
When a gearbox, pump or motor starts weeping oil around the shaft, the usual suspect is the radial shaft seal. The DBH 5198 is a lip seal with a 55 mm shaft bore, an 80 mm housing bore and a 10.00 mm height, built in the Lz design. MR Industrial Accessories supplies this brand and can help you verify the size before you order.
Reading the code: 5198 is DBH's own reference for this seal, so don't treat it as interchangeable with a number from another manufacturer. What actually travels between brands are the three dimensions: d = 55 mm for the shaft, D = 80 mm for the housing and h = 10.00 mm. The Lz designation tells you the seal has a sealing lip backed by a spring, which is the configuration used on rotating shafts that run with oil or grease.
Where it shows up: equipment with a 55 mm shaft is common in the industrial market, so this size turns up in gearboxes, speed reducers, centrifugal pumps, electric motors and transmission equipment. The job is always the same, hold the lubricant in and keep dust, water and particles out. If the seal has failed, look at the shaft surface as well, not just the seal.
Installation notes: clean the housing and check it for deformation, and inspect the shaft for burrs or a worn track before fitting anything. Coat the lip with the same oil or grease the equipment uses, press the seal in square to the shaft, and avoid hitting the lip directly. A grooved shaft may call for a repair sleeve. Speed, temperature and lubricant type all affect how long the seal lasts, so those three points are worth confirming.
Finding an equivalent: send the original code, a photo of the part and the dimensions you measure with a caliper. With that we can check options in the DBH line or in other brands we carry, and flag anything unusual about the temperature or speed of the application. To request a quote, message the part number on WhatsApp or by email and the team will reply promptly.
Dimensions
- Shaft (d)
- 55mm
- Housing bore (D)
- 80mm
- Height (h)
- 10.00mm
- Design
- Lz
Frequently asked questions
- What are the dimensions of the DBH 5198 oil seal?
- Shaft diameter 55 mm, housing diameter 80 mm and height 10.00 mm, in the Lz design with lip and spring. Confirm these three values on your equipment before ordering.
- Can a seal from another brand replace the DBH 5198?
- It can if the 55 mm shaft, 80 mm housing and 10 mm height all match and the Lz design is compatible. Compare the lip type and material too. Send us the original code and we will help you confirm.
- How do I request a quote or an equivalent?
- Send code 5198 or the dimensions on WhatsApp or by email. For an equivalent, include a photo of the part and caliper measurements so we can suggest alternatives from the DBH line or other brands we supply.