DBH 5195Sil radial shaft seal — 50 x 80 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5195Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5195Sil and any equivalents.
A radial shaft seal from the DBH line, the 5195Sil closes off the rotating shaft in equipment that runs on oil or grease. Its Lx configuration uses one sealing lip backed by a spring. The three dimensions to match on your machine are 50.00 mm at the shaft, 80.00 mm at the housing bore and 10.00 mm of height. MR Industrial Accessories supplies this seal and helps buyers confirm the size before ordering.
Reading the reference, DBH points to the seal family and 5195Sil is the individual designation. In the Lx design the elastomer body carries a single lip, held against the shaft by an internal spring, which is the usual choice for rotating shafts that stay lubricated. The elastomer and the spring together keep the contact line working through continuous service.
You will find seals like this one in gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission assemblies. Two jobs are done at the same time: the lubricant stays where it belongs, and dust, water or particles are kept out. Bearings and gears depend on that boundary, so the seal has a direct effect on how long a rotating assembly lasts.
Installation calls for a shaft with the correct hardness and surface finish, free of burrs or marks that could cut the lip. Coat the lip with the same oil the equipment uses, then drive the seal in with a tube that pushes on the outer edge, never on the lip itself. The housing bore should be clean and undistorted. When a seal has already failed, inspect shaft alignment and surface condition before fitting the replacement.
If the mounting space allows it, other designs or elastomer options may also fit, and equivalents with the same 50.00 mm shaft, 80.00 mm housing and 10.00 mm height can be sourced from other brands. Send the part number 5195Sil by WhatsApp or email and the team will reply with a quote, suggest alternatives and help you pick the right seal for the application.
Dimensions
- Shaft (d)
- 50mm
- Housing bore (D)
- 80mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently asked questions
- Where is the DBH 5195Sil oil seal used?
- Typical installations are gearboxes, pumps, electric motors and other rotating equipment. The Lx design, a single lip with spring, suits shafts that run with permanent lubrication and need both oil retention and contaminant exclusion.
- What dimensions do I need to check before ordering?
- The seal is built for a 50.00 mm shaft, an 80.00 mm housing bore and a 10.00 mm height. Confirm these three values on your equipment so the replacement matches the mounting.
- How do I ask for a quote or an equivalent seal?
- Send the part number 5195Sil and the quantity by WhatsApp or email. If you need an equivalent, include the shaft, housing and height dimensions and the team will propose options.