DBH 5154Vit radial shaft seal — 32 x 52 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5154Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5154Vit and any equivalents.
For rotating shafts that need reliable sealing, the DBH 5154Vit oil seal is a radial lip seal. It presses into the housing and rides on the shaft to keep lubricant in and contaminants out. The size is 32 mm shaft, 52 mm housing, 7 mm height, and the Lx design means a single lip with a spring. You will find this seal in gearboxes, pumps, motors, and other power transmission equipment.
The 5154Vit is part of the DBH line of radial shaft seals. Its three key dimensions are shaft 32 mm, housing 52 mm, and height 7.00 mm. The Lx configuration uses one elastomeric lip backed by a spring, which is a common choice for continuously rotating shafts with permanent lubrication. The metal case holds the seal in the housing by interference, while the lip contacts the shaft to create the sealing action.
Seals of this size appear in gearboxes, centrifugal pumps, electric motors, compressors, mixers, and belt or chain drives. Their job is to stop oil or grease from escaping and to block dust, water, and particles from getting inside. By doing that, they help protect bearings and gears, which supports the overall service life of the assembly.
Proper installation matters. Check that the shaft has the right hardness and surface finish, with no burrs or scratches that could cut the lip. Apply lubricant to the lip before sliding it into place, and keep the seal square to the shaft. Use a support tube that presses on the housing, not on the lip. If the shaft is worn, an offset lip seal may be a better option.
If you need a replacement or a different size, just send the part number 5154Vit or the three dimensions. We can also check for alternatives in other brands or lip styles. Our team will help you compare options so you can pick what fits your equipment.
To request a quote for the DBH 5154Vit oil seal, contact us on WhatsApp and include the part number. We will get back to you with the technical details you need to make your purchasing decision.
Dimensions
- Shaft (d)
- 32mm
- Housing bore (D)
- 52mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 5154Vit oil seal?
- The seal has a 32 mm shaft diameter, a 52 mm housing diameter, and a 7.00 mm height. It is an Lx design with a single lip and spring. Always confirm these measurements against your shaft and housing before installation.
- Where is this oil seal typically used?
- It is commonly found in gearboxes, pumps, electric motors, compressors, and power transmission equipment. It retains lubricant and keeps out dust and water, protecting bearings and gears. It suits rotating shafts with permanent lubrication.
- How can I get a quote or find an equivalent?
- Send us the part number 5154Vit or the dimensions of your equipment on WhatsApp. We will provide a quote and, if needed, look for an alternative in another brand or lip configuration. We can also advise on installation.