DBH 5154Sil radial shaft seal — 32 x 52 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5154Sil belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5154Sil and any equivalents.
The DBH 5154Sil is a radial shaft seal built to hold lubricant in and keep dust and water out where a shaft turns. Its three key measurements are a 32 mm shaft, a 52 mm housing bore and a 7.00 mm height, which places it in gearboxes, pumps, electric motors and other power transmission assemblies. MR Industrial Accessories LLC supplies this size as part of its seals and oil seals range for industrial replacement and maintenance work.
Reading the code helps you match the part quickly. The 5154Sil designation fixes the exact size inside the DBH line, while the numbers 32, 52 and 7.00 mm describe shaft, housing and height in that order. The Lx design is a single lip with a spring, made for rotating shafts under permanent lubrication. The seal is pressed into the housing bore and works against the shaft surface.
You will find this seal in gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. In each case it keeps lubricant where it belongs and blocks contaminants from reaching the bearings. Its compact cross section suits equipment with little axial room, and it seals shafts up to 32 mm in diameter.
Before ordering, confirm that shaft, housing and height match the original part. The Lx lip handles moderate peripheral speeds and needs a smooth shaft surface without burrs. Lubricate the lip before fitting and use an installation tool that will not cut or distort the seal. If the shaft is already worn, an additional lip may be the better choice.
Need another size or a cross-reference? Send the part number 5154Sil, or simply the shaft, housing and height values, by WhatsApp or email. We can locate a match within the DBH line or among the other brands we carry, and we will help you pick the lip design that fits your lubricant and operating conditions.
Dimensions
- Shaft (d)
- 32mm
- Housing bore (D)
- 52mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently asked questions
- What are the dimensions of the DBH 5154Sil oil seal?
- The seal fits a 32 mm shaft in a 52 mm housing bore with a 7.00 mm height. Those three values correspond to the 5154Sil designation and are what you verify against the original part.
- Where is this oil seal typically used?
- Gearboxes, pumps, electric motors and transmission equipment are common applications. It retains oil or grease on a rotating shaft and keeps contaminants out, and its compact size suits assemblies with limited axial space.
- How do I get a quote or a cross-reference?
- Send the part number 5154Sil, or the shaft, housing and height measurements, through WhatsApp or email. Our team will quote that size or suggest an equivalent from the DBH line or another brand we supply.