DBH 5065Vit radial shaft seal — 38 x 62 x 10
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 5065Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5065Vit and any equivalents.
When a gearbox, pump or motor starts weeping oil around the shaft, the usual suspect is the radial shaft seal. The DBH 5065Vit is a single-lip seal with a spring, built to hold lubricant in and keep dust, water and particles out. It fits a 38 mm shaft, a 62 mm housing bore and a 10 mm axial space, and its Lz design suits rotating shafts that run with oil or grease. MR Industrial Accessories LLC carries this size in its seals line for maintenance and replacement work.
Reading the code helps you match the part. The 5065Vit designation belongs to the DBH line, and the numbers map to the three critical dimensions: d = 38.00 mm for the shaft, D = 62.00 mm for the housing bore, and h = 10.00 mm for the height. The Lz suffix indicates a single sealing lip with an internal spring. That spring keeps the elastomer pressed against the shaft and absorbs small misalignments, while the lip wipes the shaft as it turns.
You will find this size in gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. In every case the job is the same: keep the oil or grease where it belongs and block outside contamination. Treat it as a wear part. Replace it on a preventive schedule, or as soon as you see lubricant escaping past the shaft.
Before installing, confirm that the shaft and bore match the figures above. The shaft surface should be clean and free of burrs or deep grooves, and it pays to lubricate the lip before you press the seal in. The 10 mm height tells you how much axial room the housing gives you. If the shaft is already worn, a seal with an extra lip is worth considering. Speed, temperature and the fluid in the machine all affect the final choice.
To get a quote, send the code 5065Vit or the dimensions 38 x 62 x 10 mm by WhatsApp or email. We can also check the DBH category for other diameters or heights. If you want to confirm compatibility, share the equipment data or the original seal designation and we will point you to the right option.
Dimensions
- Shaft (d)
- 38mm
- Housing bore (D)
- 62mm
- Height (h)
- 10.00mm
- Design
- Lz
Frequently asked questions
- What equipment does this oil seal fit?
- It is used on rotating shafts in gearboxes, pumps, electric motors and similar equipment where lubricant must be retained. The Lz design with a single lip and spring handles lubricated applications with moderate contamination.
- How do I ask for a quote or an equivalent?
- Send the code 5065Vit or the dimensions 38 x 62 x 10 mm by WhatsApp or email. We will quote it and, if you need, look for an equivalent in the DBH line we supply.
- What are the dimensions of the DBH 5065Vit?
- The DBH 5065Vit has a 38.00 mm shaft diameter, a 62.00 mm housing bore diameter and a 10.00 mm height. Check these three values before installing the seal.