DBH 1202Vit radial shaft seal — 15 x 27 x 6
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1202Vit belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1202Vit and any equivalents.
The DBH 1202Vit is a radial shaft seal built for a 15 mm shaft, a 27 mm housing bore and a 6 mm width. Its job is to keep lubricant where it belongs and to block dust, water and other contaminants from reaching bearings and bushings. Because it wears over time, it is normally swapped out during scheduled maintenance or when a leak appears.
This seal carries the Mx designation and is sized as shaft 15 mm, housing 27 mm, width 6.00 mm. The lip rides against the rotating shaft, while the outer diameter seats in the housing bore to hold the seal in place. It belongs to the standard radial shaft seal family and suits shafts that turn continuously or on and off.
Typical locations include gear reducer boxes, pumps, electric motors, compressors, machine tools and power transmission assemblies. It also fits wherever oil, grease or water needs to be kept apart. You will find it in food, chemical, metallurgical and water treatment plants, as long as the shaft and housing match the stated dimensions.
Before fitting, check the shaft for burrs or a worn track and make sure the housing bore is clean and undistorted. Coat the lip with lubricant, then press the seal in with a tube or spacer that contacts the outer ring only, never the lip. If the shaft shows a deep groove, you can offset the seal slightly or replace the shaft to restore proper sealing.
When you need an equivalent, send the 1202Vit code or the three dimensions (shaft, housing and width). With that information we can search the DBH line or other brands we carry. We can also tell you whether the cavity allows a different height or a version with an extra lip.
To get a quote, message the part number to the MR team on WhatsApp or by email. If you are unsure about the application or installation, our technical staff can confirm that the size and design fit your equipment.
Dimensions
- Shaft (d)
- 15mm
- Housing bore (D)
- 27mm
- Height (h)
- 6.00mm
- Design
- Mx
Frequently asked questions
- What are the dimensions of the DBH 1202Vit seal?
- The DBH 1202Vit seal fits a 15 mm shaft, a 27 mm housing and a 6.00 mm height. These three figures are the ones you need to identify a replacement.
- How do I check if this seal works on my equipment?
- Confirm that the shaft measures 15 mm, the housing bore is 27 mm and the axial space is 6 mm. If all three match, the seal will fit. If not, we can look for an equivalent.
- What does the Mx design mean on this seal?
- The Mx code refers to a construction style of the seal, typically a metal case with a single sealing lip. For detailed technical confirmation, contact us and we will share the available manufacturer information.