DBH 1202Pol radial shaft seal — 15 x 27 x 6

DBH 1202Pol belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1202Pol and any equivalents.

The DBH 1202Pol is a radial shaft seal built to keep lubricant in and contaminants out of rotating assemblies. Its Mx design combines a sealing lip with a metal body for press fitting into a cylindrical housing. With a 15 mm shaft, 27 mm housing and 6.00 mm height, it suits tight axial spaces. Treat it as a wear part and replace it when leakage first appears. MR supplies this brand and helps you match the right seal to your equipment.

The 1202Pol designation places this seal in the DBH line. Shaft 15 mm, housing 27 mm, height 6.00 mm. Those three values are what you verify before ordering. The Mx configuration means a lip seal with a metal outer case, pressed into the housing bore. Use the 1202Pol code to confirm interchangeability with other references of the same size.

Seals this size turn up in small centrifugal pumps, low-power electric motors, gear reducers, gearboxes and transmission equipment. Machine tools, washing equipment and irrigation systems also use them wherever a rotating shaft must stay lubricated and protected from dust or water. The 15 mm shaft and 27 mm housing set the fit; the 6.00 mm height sets the space you have to work with.

Before fitting, check that shaft and housing are clean and free of burrs or scratches. Coat the lip with the same oil or grease the equipment runs on. Keep the seal square to the shaft and press it in evenly, without hitting the lip. If the shaft is worn, look at a version with an auxiliary lip. Speed, temperature and lubricant type drive the selection; send us your equipment data if you are unsure.

For an equivalent, give us the 1202Pol code or the 15 x 27 x 6 mm dimensions plus the application. We can search within the same DBH brand or other lines we distribute, keeping the shaft, housing and height the same. We can also help when the housing is non-standard or the original seal is no longer available.

To request a quote, message us on WhatsApp with the code and the quantity you need. If you want to confirm this reference fits your equipment, send a photo of the old seal or the measurements you took with a caliper.