DBH 1014 radial shaft seal — 61.47 x 76.2 x 7/9
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DBH 1014 belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1014 and any equivalents.
Part 1014 from DBH is a radial lip seal built for a 61.47 mm shaft running in a 76.20 mm bore, with a 7.00/9.00 mm height. It keeps oil or grease where it belongs and keeps dust, water and other particles out of the housing. You will find it on rotating shafts in gearboxes, pumps, motors and transmission drives, where a worn or missing seal puts bearings and gears at risk.
The reference breaks down simply: DBH is the brand, 1014 is the part number, and the A 190 designation describes a single lip with a spring. Dimensions read as shaft 61.47 mm, housing 76.20 mm, width 7.00/9.00 mm. Because two heights are listed, the seal fits housings whose depths fall inside that range, which gives some room when the bore is not machined to a single depth.
Typical service includes gearboxes, centrifugal pumps, electric motors, compressors, and belt or chain drives. In each case the seal holds lubricant in and contamination out at the point where the shaft passes through the housing, which protects the bearings and gears behind it. Industrial machinery, process equipment and vehicles with rotating shafts are common places to find this size.
Selection comes down to two checks: the shaft diameter and the bore diameter must match the values above. The shaft should be ground and hard enough that the lip does not wear out early. At installation, coat the lip with the same oil or grease used in service, confirm the spring sits correctly, keep the seal free of impact, and verify that the housing is concentric so leaks do not develop.
If you need the same dimensions from another line, or a different size altogether, send part number 1014 or the three dimensions by WhatsApp or email. Quotes go out promptly, and the team can point you to equivalents and help you confirm the right choice for the application.
Dimensions
- Shaft (d)
- 61.47mm
- Housing bore (D)
- 76.2mm
- Height (h)
- 7.00/9.00mm
- Design
- A 190
Frequently asked questions
- What size shaft and bore does the DBH 1014 seal fit?
- It is made for a 61.47 mm shaft and a 76.20 mm housing bore, with a height of 7.00/9.00 mm. Match those three values to your equipment before ordering.
- Where is this seal normally used?
- Gearboxes, pumps, electric motors, compressors and belt or chain transmission equipment. Its job is to hold lubricant in and keep contaminants out where the shaft rotates.
- How do I get a quote or an equivalent?
- Send part number 1014, or the shaft, housing and height dimensions, by WhatsApp or email. The team replies promptly and can suggest equivalent options.