V-belt Dayco CP59

DAYCO CP59 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP59 and any equivalents.

The Dayco CP59 is a classical wrapped V-belt in a C profile, with a length of 1600.2 mm, a top width of 22 mm and a height of 14 mm. Classical wrapped V-belts like this are used on industrial drives such as pumps, fans, compressors and other general machinery where a reliable, familiar profile is required. To confirm fit, check the belt marking on the old belt and measure the profile and length against this listing.

This belt has a 40° angle and a C profile, making it a standard classical V-belt cross-section. The wrapped construction is typical for drives that need a belt with good grip and resistance to normal industrial operating conditions. It is not a narrow wedge belt, cogged belt or synchronous belt, so it should be matched to a classical C-section pulley groove.

When replacing a belt, always read the marking on the back of the old belt. If it shows a C profile and a length close to 1600.2 mm, the Dayco CP59 is the correct size to quote. If the marking is worn or unreadable, measure the outside length and the top width of the old belt, and confirm the pulley groove is a C section. For drives using multiple belts, replace all belts in the set at the same time to keep tension even across the grooves.

To request a quote, send the part number CP59, the quantity you need, and any details from the old belt marking. If you are unsure whether this is the right belt for your drive, include the profile and length from the old belt and our team can help confirm the match or suggest an equivalent.