V-belt Dayco CP57
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP57 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP57 and any equivalents.
The Dayco CP57 is a classical wrapped V-belt with a C profile and a length of 1549.4 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which leads to slip and heat. Confirm the sheaves are aligned and the shafts turn freely. Measure the old belt only after you note how it sits in the groove.
The CP57 has a top width of 22 mm, a height of 14 mm, and a 40-degree angle. These dimensions match the C profile, and the length is 1549.4 mm. If the old belt is stretched or worn, compare its marking with these values rather than relying on the measured length alone.
When you request a quote, send the part number CP57 and the quantity. If you are replacing more than one belt on a drive, note that so we can help you confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 1549.4mm
Frequently asked questions
- What should I check on the drive before fitting the CP57?
- Inspect sheave grooves for wear or debris, verify alignment, and make sure the shafts turn freely. Correct the drive first so the new belt seats properly.
- How do I confirm the CP57 matches my old belt?
- Compare the marking on the old belt with the CP57: C profile, 22 mm top width, 14 mm height, 40-degree angle, and 1549.4 mm length.
- What do you need to quote the CP57?
- Send the part number CP57 and the quantity you need via WhatsApp or email. If you are replacing a set, include that as well.