V-belt Dayco CP220
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP220 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP220 and any equivalents.
The Dayco CP220 is a classical V-belt in the C profile, with a length of 5638.8 mm. Its 22 mm top width, 14 mm height and 40-degree angle define how it seats in a C-section pulley groove. Use these dimensions to confirm the belt matches the drive before you order.
Profile and length are the two checks that matter first. The C profile sets the cross-section that fits the pulley groove, while 5638.8 mm is the belt length you match against the old belt or the drive specification. A belt that is wrong in either dimension will not run correctly, even if the part number looks familiar.
Because this is a classical wrapped V-belt, the construction suits general industrial drives where a standard C-section belt is called for. The 22 mm top width and 14 mm height are the measured section dimensions, and the 40-degree angle is the included angle of the belt sides.
Send the part number CP220, or the profile and length, by WhatsApp or email and we will confirm the belt or suggest an equivalent. If you have the old belt, the marking on the back is the fastest way to identify it. Photos of the belt and the pulley groove also help us check the section.
Dimensions
- Section
- C
- Length
- 5638.8mm
Frequently asked questions
- What do the profile and length tell me about the Dayco CP220?
- The C profile means the belt has a 22 mm top width, 14 mm height and 40-degree angle, so it fits a C-section pulley groove. The 5638.8 mm length is the belt length to match against your drive or the belt being replaced.
- How do I confirm this belt fits my drive?
- Check the old belt for its profile and length marking, then compare with C, 5638.8 mm, 22 mm top width and 14 mm height. If the marking is worn, send photos of the belt and the pulley groove and we will help confirm.
- What should I send to request a quote for the CP220?
- Send the part number CP220 by WhatsApp or email. If you are replacing a belt, include the profile and length from the old belt, or a photo of the back marking, so we can confirm the right belt or suggest an equivalent.