V-belt Dayco CP210
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP210 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP210 and any equivalents.
The Dayco CP210 is a classical wrapped V-belt in a C profile, built for the heavy-driven industrial drives where this cross-section is standard. With a 5435.6 mm length, it suits long-center-distance layouts on pumps, fans, compressors and similar equipment. Use the profile and length to confirm it matches the drive before you order.
This belt measures 22 mm across the top, 14 mm high and has a 40° angle, so it seats correctly in a C-section pulley groove. The wrapped construction is the usual choice for drives that run in dusty or damp plant conditions, where a firm grip and resistance to abrasion matter more than raw speed. Confirm the existing belt is a C profile and that its outside length reads 5435.6 mm.
To verify fit, read the marking on the back of the old belt and compare it with the part number CP210. Check that the pulley grooves are clean and free of wear, and that the belt sits flush rather than sinking into the groove. If the drive uses more than one belt, replace the full set at the same time so the load stays evenly shared.
Send the part number CP210, the belt marking and the drive details by WhatsApp or email and our team will confirm the right belt or suggest an equivalent. A photo of the old belt and the pulley arrangement helps us match the profile and length quickly.
Dimensions
- Section
- C
- Length
- 5435.6mm
Frequently asked questions
- How do I confirm the Dayco CP210 fits my drive?
- Check that the old belt is a C profile and that its length is 5435.6 mm. Compare the part number on the back of the belt with CP210. If the markings match and the belt sits correctly in the pulley grooves, it is the right size.
- What should I send to get a quote for the CP210?
- Send the part number CP210, the marking from the old belt, and the drive details by WhatsApp or email. A photo of the belt and pulleys helps us confirm the profile and length.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On a drive that uses several belts, replace the full set together so the load is shared evenly and the new belt does not run against worn ones.