V-belt Dayco CP202
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP202 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP202 and any equivalents.
The Dayco CP202 is a classical wrapped V-belt with a C profile and a length of 5232.4 mm. This page gives you the dimensions and profile you need to match it to the belt being replaced.
To confirm the CP202 is the correct replacement, start with the belt currently on the drive. Read the marking on the back of the old belt and compare the profile letter and length to the CP202: profile C, length 5232.4 mm. The belt has a top width of 22 mm and a height of 14 mm, with a 40-degree angle. These values identify the belt; they do not describe the drive.
If the old marking is worn or missing, measure the belt and check the drive for the number of grooves and the pulley dimensions. The CP202 is a classical wrapped V-belt, not a narrow wedge, cogged, banded, or synchronous belt. When a drive uses multiple belts, replace the full set so the load stays even across all strands.
Send the part number CP202 by WhatsApp or email to request a quote. If you are unsure between the CP202 and another belt, include the old belt marking and the drive details. We carry the Dayco line and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 5232.4mm
Frequently asked questions
- What are the dimensions of the Dayco CP202?
- The Dayco CP202 is a classical wrapped V-belt with a C profile. It has a length of 5232.4 mm, a top width of 22 mm, a height of 14 mm, and a 40-degree angle.
- How do I match the CP202 to the belt I am replacing?
- Compare the profile and length on the back of the old belt to profile C and 5232.4 mm. Also check the top width and height against 22 mm and 14 mm. If the marking is not readable, measure the old belt and note the drive details.
- How do I request a quote for the Dayco CP202?
- Send the part number CP202 by WhatsApp or email. If you need help confirming the belt, include the old belt marking and the drive details so we can assist.