V-belt Dayco CP200
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP200 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP200 and any equivalents.
The Dayco CP200 is a classical V-belt in the C profile with a length of 5181.6 mm. It is used in industrial drives where a wrapped classical belt is specified, such as on large fans, pumps, and compressors. To confirm fit, match the profile and length to your drive's requirements.
This belt has a top width of 22 mm, a height of 14 mm, and a 40-degree angle. The C profile is a standard classical cross-section for moderate to high-power drives. The wrapped construction is typical for general industrial service.
When replacing, check the belt marking on the back for the profile and length. The CP200 is identified by its part number, profile, and length. If the old belt is worn or the marking is unreadable, measure the top width and the outside length to verify the C profile and 5181.6 mm length.
For a quote, send the part number CP200, the profile C, and the length 5181.6 mm. If you are unsure, provide the drive details and a photo of the old belt. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 5181.6mm
Frequently asked questions
- What is the Dayco CP200?
- The Dayco CP200 is a classical V-belt in the C profile with a length of 5181.6 mm. It has a top width of 22 mm, a height of 14 mm, and a 40-degree angle.
- How do I confirm this belt fits my drive?
- Check that your drive uses a C profile belt and that the required length is 5181.6 mm. You can also measure the top width of the old belt (22 mm) and its height (14 mm). If the old belt is marked, look for the part number CP200.
- What information should I send for a quote?
- Send the part number CP200, the profile C, and the length 5181.6 mm. If you have the old belt, a photo of the marking can help. The team will reply promptly with a quote or a suggested equivalent.