V-belt Dayco CP153
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical wrapped industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO CP153 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CP153 and any equivalents.
The Dayco CP153 is a classical wrapped V-belt with a C profile and a length of 3987.8 mm. It is built to a 40-degree angle, with a 22 mm top width and a 14 mm height. When a drive is down, the fastest way to confirm the correct replacement is to match these figures to the belt you are removing.
Start with the marking on the back of the old belt. If it reads CP153, this is the same part. If the marking is worn or unreadable, measure the outside length and compare it to 3987.8 mm, then check the cross-section: 22 mm across the top and 14 mm high. The 40-degree angle confirms it is a classical V-belt, not a narrow wedge or cogged profile.
A C profile belt of this length is often one of several on a driven machine. If the other belts on the same drive show cracking, glazing or uneven wear, note their part numbers as well. Replacing a full set at one time keeps the load shared evenly across the sheaves.
Send the part number CP153, or the dimensions above, by WhatsApp or email. If the marking on your old belt is different, include it and the measured length so we can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3987.8mm
Frequently asked questions
- How do I confirm that the Dayco CP153 is the belt I need?
- Check the marking on the back of the belt you are replacing. If it reads CP153, it is the same part. If the marking is gone, measure the outside length and compare it to 3987.8 mm, and check that the cross-section is 22 mm top width by 14 mm height with a 40-degree angle.
- What should I send to request a quote?
- Send the part number CP153, or the profile and length from the old belt. If you have the old belt in hand, include the marking and the measured length so we can confirm the match or suggest an equivalent.
- Can I replace just one belt on a multi-belt drive?
- If the other belts on the same drive show wear, replacing the full set at one time is common practice. Send the part numbers for the other belts and we can help confirm each one.